Description
• Large-capacity data links are easily achieved without programming simply by setting data link tables.
• Up to 20,000 *1 send/receive words can be set per node for Units (up to 62,000 words for Boards).
• Data links can be performed with up to 4,000 *2 words per node while ensuring data concurrency.
• User-set data link tables can be changed while data links are operating. *3
• Errors for the entire system can be monitored by using error diagnosis support software and a variety of status flags.
*1. Supported for unit version 1.2 or later.
*2. CJ1W-CLK23 and 3G8F7-CLK[]3 are supported.
*3. Supported for CJ1W-CLK23, 3G8F7-CLK[]3, and models ending with “-V1”.
International Standards
- The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
- Contact your OMRON representative for further details and applicable conditions for these standards.
Controller Link Units
| Unit clas- sifica- tion |
Product name |
Specifications | No. of unit numbers allocated |
Current consumption (A) |
Model | Stand- ards |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| Communi- cations cable |
Communi- cations type |
Duplex support |
Max. Units mountable per CPU Unit |
5 V DC |
24 V DC |
|||||
| CJ1 CPU Bus Unit |
Controller Link Unit  |
Wired shielded twisted-pair cable * |
Data links and message service |
No | 8 | 1 | 0.35 | — | CJ1W-CLK23 | UC1, N, L, CE |
Note: This unit cannot be used with the Machine Automation Controller NJ-series.
* Use the following special cable for shielded, twisted-pair cable.
• ESVC0.5×2C-13262 (Bando Electric Wire: Japanese Company)
• ESNC0.5×2C-99-087B (JMACS Japan Co., Ltd.: Japanese Company)
• ESPC 1P×0.5mm2 (Nagaoka Electric Wire Co.,Ltd.: Japanese Company)
• Li2Y-FCY2×0.56qmm (Kromberg & Schubert, Komtec Department: German Company)
• 1×2×AWG-20PE+Tr.CUSN+PVC (Draka Cables Industrial: Spanish Company)
• #9207 (Belden: US Company)
* Use the following special cable for shielded, twisted-pair cable.
• ESVC0.5×2C-13262 (Bando Electric Wire: Japanese Company)
• ESNC0.5×2C-99-087B (JMACS Japan Co., Ltd.: Japanese Company)
• ESPC 1P×0.5mm2 (Nagaoka Electric Wire Co.,Ltd.: Japanese Company)
• Li2Y-FCY2×0.56qmm (Kromberg & Schubert, Komtec Department: German Company)
• 1×2×AWG-20PE+Tr.CUSN+PVC (Draka Cables Industrial: Spanish Company)
• #9207 (Belden: US Company)
Accessories
There is no accessory for the CJ series Controller Link Unit.
Controller Link Support Boards
| Product name | Specifications | Accessories | Model | Standards | |
|---|---|---|---|---|---|
| Communications cable |
Communications type |
||||
| Controller Link Support Board for PCI Bus  |
Wired shielded twisted-pair cable |
Data links and message service |
CD-ROM x 1 * INSTALLATION GUIDE (W467) x 1 Communications connector x 1 |
3G8F7-CLK23-E | CE |
* The CD-ROM contains the following software.
• Controller Link (PCI) Driver
• FinsGateway Version 2003 (PCI-CLK Edition)
• FinsGateway Version 3 (PCI-CLK Edition)
• Setup Diagnostic Utility
• C Library
• Controller Link (PCI) Driver
• FinsGateway Version 2003 (PCI-CLK Edition)
• FinsGateway Version 3 (PCI-CLK Edition)
• Setup Diagnostic Utility
• C Library
Repeater Units
| Name | Specifications | Model | Standards |
|---|---|---|---|
| Controller Link Repeater Unit  |
Wire-to-Wire Model | CS1W-RPT01 | UC1, CE |
| Wire-to-Optical (H-PCF) Model *1 | CS1W-RPT02 | ||
| Wire-to-Optical (GI) Model *2 | CS1W-RPT03 |
Using Repeater Units enables T-branches and long-distance wiring for Wired Controller Link networks, 62-node configurations, and converting part of the network to optical cable.
*1. When using wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a H-PCF
optical fiber cable with connector.
*2. When using wire-to-optical (GI) cable, use a GI optical cable (for Controller Link).
*1. When using wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a H-PCF
optical fiber cable with connector.
*2. When using wire-to-optical (GI) cable, use a GI optical cable (for Controller Link).
Relay Terminal Block
| Name | Specifications | Model | Standards |
|---|---|---|---|
| Relay Terminal Block for Wired Controller Link Units  |
Used for Wired Controller Link Units (set of 5) | CJ1W-TB101 | — |
Controller Link Units can be replaced without stopping the communications of the entire network if a Relay Terminal Block is installed in advance on the Unit in a Wired Controller Link network. Relay Terminal Blocks cannot be used on Controller Link Support Boards.
H-PCF Cables and Optical Connectors
| Name | Application/construction | Specifications | Model | Standards | |||
|---|---|---|---|---|---|---|---|
| Optical Fiber Cables | Controller Link, SYSMAC LINK, SYSBUS |
 1. Optical fiber single-core cord 2. Tension member (plastic-sheathed wire) 3. Filler (plastic) 4. Filler surrounding signal wires (plastic, yarn, or fiber) 5. Holding tape (plastic) 6. Heat-resistant PV sheath |
Two-core optical cable with tension member |
Black 10 m | S3200-HCCB101 | — | |
| Black 50 m | S3200-HCCB501 | ||||||
| Black 100 m | S3200-HCCB102 | ||||||
| Black 500 m | S3200-HCCB502 | ||||||
| Black 1000 m | S3200-HCCB103 | ||||||
| Orange 10 m | S3200-HCCO101 | ||||||
| Orange 50 m | S3200-HCCO501 | ||||||
| Orange 100 m | S3200-HCCO102 | ||||||
| Orange 500 m | S3200-HCCO502 | ||||||
| Orange 1000 m | S3200-HCCO103 | ||||||
| Optical Connectors (Crimp-cut) |
 |
CS1W-RPT02 | Half lock | S3200-COCF2571 | |||
 |
Full lock | S3200-COCF2071 | |||||
H-PCF Optical Fiber Cables with Connectors (Black Composite Cables with Two-Optical Lines and Two Power Supply Lines)
| Application | Appearance | Model | Standards |
|---|---|---|---|
| Controller Link, SYSMAC LINK |
 |
S3200-CN[][][]-20-20 | — |
 |
S3200-CN[][][]-20-25 | ||
 |
S3200-CN[][][]-25-25 |
Optical connectors for H-PCF Optical Cables with Connectors are adhesive polished.
Cable Length
The following cable lengths are available: 2 m, 5 m, 15 m, 20 m. For lengths of 21 m or more, contact your OMRON sales representative.
Model Numbers
Optical Connector Assembly Tool
| Name | Applicable Unit | Model | Manufacturer | Standards |
|---|---|---|---|---|
| Optical Fiber Assembly Tool * |
This tool is used on site for mounting crimp-cut connectors and hard plastic-clad silica optical fiber for optical transmission systems of SYSMAC C-series SYSBUS, SYSMAC LINK, and Controller Link. |
CAK-0057 | Sumitomo Electric Industries, Ltd. |
— |
* There is a risk of quality problems when using cables assembled by typical users, so we recommend purchasing
cables with preattached connectors or having a qualified technician assemble the cables.
cables with preattached connectors or having a qualified technician assemble the cables.
Communications Specifications
| Items | Specifications |
|---|---|
| Model | CJ1W-CLK23 3G8F7-CLK23-E CJ1W-CLK21-V1 *1 3G8F7-CLK21-EV1 *1 |
| Type | Wired (shielded twisted-pair cable) |
| Communications method | N:N token-bus method |
| Code | Manchester code |
| Modulation | Baseband code |
| Synchronization | Flag synchronization (conforms to HDLC frames) |
| Transmission path format | Multidrop method (bus type) |
| Transmission speed | The following are the maximum transmission distances depending on the transmission speed. 2 Mbits/s: 500 m 1 Mbits/s: 800 m 500 kbits/s: 1 km |
| Maximum transmission distance |
|
| Maximum distance between nodes |
Not specified. (Maximum transmission distance must be satisfied for the entire system.) |
| Medium | Specified shielded twist-pair cable Two signal wires, one shield |
| Node connection method | PLC: Connection to terminal block Computer: Connection using special (supplied) connector |
| Maximum number of nodes | 32 or 62 nodes *2 *3 |
| Applicable Programming Devices |
CX-Integrator in CX-One, CX-Net in CX-Programmer *3, and Programming Console |
| Communications functions | Data links and message service |
| Number of data link words | Send words per node: 4,000 words max. (CJ1W-CLK[]3), 1,000 words max. (All other Units) Number of send/receive words per node: 12,000 words max. (Pre-Ver. 1.2) 20,000 words max. (unit Ver. 1.2 or later) Total number of send words per network: 62,000 words max. |
| Data link areas | PLC: Bit areas (CIO Area, Work Area, Link Area *4), Data Memory (DM), Extended DM Area (EM) Computer: FinsGateway event memory |
| Message length | 2,012 bytes max. (including the header) |
| RAS functions | Polling node backup function Self-diagnosis function (hardware checking at startup) Echoback test and broadcast test (using the FINS command) Watchdog timer Error log function |
| Error control | Manchester code check CRC check (CCITT X16 +X12 +X5 +1) |
*1. Discontinuation models in July 2012.
*2. With wired models, the maximum number of nodes is 32 if Repeater Units are not used. A Repeater Unit is required
when building a network with more than 32 nodes. If a Repeater Unit is used, be sure to use only the following
Controller Link Units or Boards and set the Wired Network 62 Node Enable Bit in the DM Parameter Area software
switches at all nodes.
CS1W-CLK23/CLK21-V1
CJ1W-CLK23/CLK21-V1
3G8F7-CLK23-E/CLK21-EV1
*3. CX-Net in CX-Programmer version 3.1 or earlier can be used only in a system with a maximum of 32 nodes (node
address 1 to 32). If a system is to be used with a maximum of 62 nodes (node addresses 1 to 62), use CX-Net in
CX-Programmer version 3.2 or higher or the CX-Integrator.
*4. CJ-series PLCs do not have a Link Area, but LR000 to LR199 are automatically converted CIO 1000 to CIO 1199.
*2. With wired models, the maximum number of nodes is 32 if Repeater Units are not used. A Repeater Unit is required
when building a network with more than 32 nodes. If a Repeater Unit is used, be sure to use only the following
Controller Link Units or Boards and set the Wired Network 62 Node Enable Bit in the DM Parameter Area software
switches at all nodes.
CS1W-CLK23/CLK21-V1
CJ1W-CLK23/CLK21-V1
3G8F7-CLK23-E/CLK21-EV1
*3. CX-Net in CX-Programmer version 3.1 or earlier can be used only in a system with a maximum of 32 nodes (node
address 1 to 32). If a system is to be used with a maximum of 62 nodes (node addresses 1 to 62), use CX-Net in
CX-Programmer version 3.2 or higher or the CX-Integrator.
*4. CJ-series PLCs do not have a Link Area, but LR000 to LR199 are automatically converted CIO 1000 to CIO 1199.
Individual Specifications
Controller Link Units
| Item | Specifications |
|---|---|
| Model | CJ1W-CLK23 CJ1W-CLK21-V1 * |
| Applicable PLC | All CJ-series CPU Units |
| Number of mountable Units | 8 max. |
| Installation site | Install onto a CPU Backplane or Expansion Backplane (classified as a CPU Bus Unit). |
| Storage location of network parameters and manually set data link tables |
System Bus Unit Area (in the CPU Unit parameter area). |
| Storage location of routing tables | CPU Unit parameter area |
| Weight | 110 g |
| Current consumption: 5 V in PLC | 0.35 A |
* Discontinuation models in July 2012.
Controller Link Support Boards (for PCI Bus)
| Item | Specifications | |||
|---|---|---|---|---|
| Model | 3G8F7-CLK23-E | 3G8F7-CLK13-E | 3G8F7-CLK53-E | |
| Computer-compatible models | IBM PC/AT or compatible CPU: Intel Celeron 400 MHz or better Main memory: 128 MB minimum One or more PCI bus slots (PCI bus revision 2.0 or later, power supply: 5 V) Free hard disk space: 70 MB min. CD-ROM drive: One required for installation Display: VGA (640 x 480 (pixels) min.) (Other conditions conform to the OS.) |
|||
| Compatible OS | FinsGateway Version2003 *1 Windows 10 (32bit) Windows 8 (32bit) Windows 7 (32bit) Professional Windows 7 (32bit) Home Premium Windows Vista Business Windows Vista Home Premium FinsGateway Version3 *2 Windows XP Professional Windows XP Home Edition Windows 2000 Professional Windows NT4.0 (Service Pack 3 or higher) Windows ME Windows 98SE |
|||
| Weight | 104 g | 120 g (excluding mounting bracket) | 124 g (excluding mounting bracket) | |
| Current consumption |
5 V in PLC | 0.35 A | 0.54 A | 0.60 A |
| External 24 V | — | 0.35 A | 0.35 A | |
*1. Install the software from CD Ver. 3.12 or higher if the operating system is Windows 10 or 8 (32bit).
*2. Install FinsGateway version 3 if the operating system is Windows NT 4.0 (Service pack 3 or higher), Windows ME, or
Windows 98SE. In that case, however, the new functions of Controller Link Support Boards for the PCI Bus cannot be
used (i.e., automatic data link creation with 1:N allocation, changing data link tables with active data links, 62-node
setting for wired models, and maximum of 4000 send words).
*2. Install FinsGateway version 3 if the operating system is Windows NT 4.0 (Service pack 3 or higher), Windows ME, or
Windows 98SE. In that case, however, the new functions of Controller Link Support Boards for the PCI Bus cannot be
used (i.e., automatic data link creation with 1:N allocation, changing data link tables with active data links, 62-node
setting for wired models, and maximum of 4000 send words).
Repeater Units
| Item | Specifications | ||
|---|---|---|---|
| Model | CS1W-RPT01 | CS1W-RPT02 | CS1W-RPT03 |
| Supported Units/Boards | All wired Controller Link Units and Boards Note: If a maximum of 62 nodes is used, models that support 62 nodes must be used. |
||
| Transmission line | Wire-to-wire | Wire-to-optical (H-PCF) | Wire-to-optical (GI) |
| Transmission line format | Multi-drop Tree |
1:1 type | 1:1 type |
| Installation | Repeater Units are not mounted to the PLC. They are mounted separately with screws or on a DIN Track. | ||
| Weight | 130 g | 130 g (excluding mounting bracket) | 130 g (excluding mounting bracket) |
| Allowable power supply voltage range |
20.4 to 26.4 V DC (24 V DC -15 to 10%) | ||
| Current consumption | 24 V DC at 0.06 A | 24 V DC at 0.07 A | |
| Inrush current | 2.5 A max. at 24 V DC (5 ms after startup) | ||
Repeater Units are used to expand the Controller Link network for wired models. For Wired-to-optical Repeater Units, always use a set of two (1:1).
Optical Ring Controller Link Units and Boards cannot be connected to the optical cable section between Repeater Units.
(Unit: mm)
CJ1W-CLK23/CJ1W-CLK21-V1 *
* Discontinuation models in July 2012.
|
Catalog Name
|
Catalog Number
[size] |
Last Update
|
|---|---|---|
 CJ1W-CLK Data Sheet |
– [945KB] |
Dec 17, 2018 |
Reviews
There are no reviews yet.