{"id":1598,"date":"2019-01-04T07:50:25","date_gmt":"2019-01-04T07:50:25","guid":{"rendered":"http:\/\/store.al-tet.com\/?post_type=product&p=1598"},"modified":"2019-01-04T07:50:27","modified_gmt":"2019-01-04T07:50:27","slug":"nx-eic202","status":"publish","type":"product","link":"http:\/\/store.al-tet.com\/index.php\/product\/nx-eic202\/","title":{"rendered":"NX-EIC202"},"content":{"rendered":"
\n
\n

\u2022 Up to 63 NX-IO Units can be connected to one EtherNet\/IP Coupler Unit. Standard and high-performance units can be mixed.*<\/p>\n

\u2022 Each Coupler plus its I\/O form just a single EtherCAT node on the network.<\/p>\n

\u2022 I\/O control and safety control can be integrated by connecting Units for safety.<\/p>\n

\u2022 The IP address can be found on the label on the Unit, without using software.<\/p>\n

\u2022 Slave configuration by Sysmac Studio can be done centrally via the controller, or on-the-spot using the Coupler’s built-in USB port.<\/p>\n<\/div>\n<\/div>\n

\n
\n

* Input per Coupler Unit: Maximum 504 bytes, Output per Coupler Unit: Maximum 504 bytes<\/p>\n<\/div>\n<\/div>\n

\n
\n

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
\nEtherCAT\u00ae is a registered trademark of Beckhoff Automation GmbH for their patented technology. EtherNet\/IP\u2122 is the trademarks of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

Applicable standards<\/h4>\n
\n
\n

Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nCurrent consumption<\/strong><\/th>\nMaximum I\/O power supply current<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP Coupler Unit
\n\"3412_lu_1_1\"<\/strong><\/th>\n		1.60 W or lower<\/td>\n10 A<\/td>\nNX-EIC202<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Automation Software Sysmac Studio<\/h4>\n
\n
\n

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
<\/th>\nNumber of
\nlicenses<\/strong><\/th>\n		Media<\/strong><\/th>\n<\/tr>\n
Sysmac Studio
\nNX-I\/O Edition
\nVer.1.[][] *1 *2<\/strong><\/th>\n		Sysmac Studio NX-I\/O Edition is a limited license that
\nprovides selected functions required for EtherNet\/IP
\nCoupler settings.
\nBecause this product is a license only, you need the
\nSysmac Studio Standard Edition DVD media to install it.<\/td>\n		1 license<\/td>\n—<\/td>\nSYSMAC-NE001L<\/strong><\/td>\n<\/tr>\n
Sysmac Studio
\nStandard Edition
\nVer.1.[][] *2<\/strong><\/th>\n		The Sysmac Studio is the software that provides an
\nintegrated environment for setting, programming,
\ndebugging and maintenance of machine automation
\ncontrollers including the NJ\/NX-series CPU Units, NY-
\nseries Industrial PC, EtherCAT Slave, and the HMI.<\/p>\n

Sysmac Studio runs on the following OS.
\nWindows 7 (32-bit\/64-bit version)\/
\nWindows 8 (32-bit\/64-bit version)\/
\nWindows 8.1 (32-bit\/64-bit version)\/
\nWindows 10 (32-bit\/64-bit version)<\/p>\n

This software provides functions of the Vision Edition.
\nRefer to your OMRON website for details such as
\nsupported models and functions.<\/td>\n

—
\n(Media only)<\/td>\n		DVD<\/td>\nSYSMAC-SE200D<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The Sysmac Studio Standard Edition with license(s) (SYSMAC-SE[][][]L) provides functions of the NX-I\/O Edition
\n(SYSMAC-NE001L).
\n*2. With the Sysmac Studio Standard Edition with license(s) (SYSMAC-SE[][][]L) version 1.10 or higher, you can use the
\nsetup functions for the EtherNet\/IP Coupler.<\/div>\n<\/div>\n<\/div>\n

Connecting Cable<\/h4>\n

Peripheral (USB) Port<\/h4>\n
\n
\n

Use a commercially available USB-certified cable.
\nSpecifications: USB 1.1 or 2.0 cable (A connector – B connector), 5.0 m max.<\/p>\n<\/div>\n<\/div>\n

Recommended EtherNet\/IP Communications Cables<\/h4>\n
\n
\n

For EtherNet\/IP, required specification for the communications cables varies depending on the baud rate. For 100BASE-TX\/10BASE-T, use a straight or cross STP (shielded twisted-pair) cable of category 5 or higher. For 1000BASE-T, use a straight or cross STP cable of category 5e or higher with double shielding (aluminum tape and braiding).<\/p>\n<\/div>\n<\/div>\n

Cable with Connectors<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nAppearance<\/strong><\/th>\nRecommended
\nmanufacturer<\/strong><\/th>\n		Cable
\nlength
\n(m)<\/strong><\/th>\n		Model<\/strong><\/th>\n<\/tr>\n
Cable with Connectors on Both Ends
\n(RJ45\/RJ45)
\nStandard RJ45 plugs type *1
\nWire Gauge and Number of Pairs:
\nAWG26, 4-pair Cable
\nCable Sheath material: LSZH *2
\nCable color: Yellow *3<\/td>\n		\"3412_lu_3_1\"<\/td>\nOMRON<\/td>\n0.3<\/td>\nXS6W-6LSZH8SS30CM-Y<\/strong><\/td>\n<\/tr>\n
0.5<\/td>\nXS6W-6LSZH8SS50CM-Y<\/strong><\/td>\n<\/tr>\n
1<\/td>\nXS6W-6LSZH8SS100CM-Y<\/strong><\/td>\n<\/tr>\n
2<\/td>\nXS6W-6LSZH8SS200CM-Y<\/strong><\/td>\n<\/tr>\n
3<\/td>\nXS6W-6LSZH8SS300CM-Y<\/strong><\/td>\n<\/tr>\n
5<\/td>\nXS6W-6LSZH8SS500CM-Y<\/strong><\/td>\n<\/tr>\n
Cable with Connectors on Both Ends
\n(RJ45\/RJ45)
\nRugged RJ45 plugs type *1
\nWire Gauge and Number of Pairs:
\nAWG22, 2-pair Cable
\nCable color: Light blue<\/td>\n		\"3412_lu_3_2\"<\/td>\nOMRON<\/td>\n0.3<\/td>\nXS5W-T421-AMD-K<\/strong><\/td>\n<\/tr>\n
0.5<\/td>\nXS5W-T421-BMD-K<\/strong><\/td>\n<\/tr>\n
1<\/td>\nXS5W-T421-CMD-K<\/strong><\/td>\n<\/tr>\n
2<\/td>\nXS5W-T421-DMD-K<\/strong><\/td>\n<\/tr>\n
5<\/td>\nXS5W-T421-GMD-K<\/strong><\/td>\n<\/tr>\n
10<\/td>\nXS5W-T421-JMD-K<\/strong><\/td>\n<\/tr>\n
Cable with Connectors on Both Ends
\n(M12 Straight\/M12 Straight)
\nShield Strengthening Connector cable *4
\nM12\/Smartclick Connectors
\nWire Gauge and Number of Pairs:
\nAWG22, 2-pair Cable
\nCable color: Black<\/td>\n		\"3412_lu_3_3\"<\/td>\nOMRON<\/td>\n0.5<\/td>\nXS5W-T421-BM2-SS<\/strong><\/td>\n<\/tr>\n
1<\/td>\nXS5W-T421-CM2-SS<\/strong><\/td>\n<\/tr>\n
2<\/td>\nXS5W-T421-DM2-SS<\/strong><\/td>\n<\/tr>\n
3<\/td>\nXS5W-T421-EM2-SS<\/strong><\/td>\n<\/tr>\n
5<\/td>\nXS5W-T421-GM2-SS<\/strong><\/td>\n<\/tr>\n
10<\/td>\nXS5W-T421-JM2-SS<\/strong><\/td>\n<\/tr>\n
Cable with Connectors on Both Ends
\n(M12 Straight\/RJ45)
\nShield Strengthening Connector cable *4
\nM12\/Smartclick Connectors
\nRugged RJ45 plugs type
\nWire Gauge and Number of Pairs:
\nAWG22, 2-pair Cable
\nCable color: Black<\/td>\n		\"3412_lu_3_4\"<\/td>\nOMRON<\/td>\n0.5<\/td>\nXS5W-T421-BMC-SS<\/strong><\/td>\n<\/tr>\n
1<\/td>\nXS5W-T421-CMC-SS<\/strong><\/td>\n<\/tr>\n
2<\/td>\nXS5W-T421-DMC-SS<\/strong><\/td>\n<\/tr>\n
3<\/td>\nXS5W-T421-EMC-SS<\/strong><\/td>\n<\/tr>\n
5<\/td>\nXS5W-T421-GMC-SS<\/strong><\/td>\n<\/tr>\n
10<\/td>\nXS5W-T421-JMC-SS<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20 m are available.
\nRugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15 m are available. For details, refer to Cat.No.G019.
\n*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
\nAlthough the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
\n*3. Cables colors are available in blue, yellow, or Green.
\n*4. For details, contact your OMRON representative.<\/p>\n<\/div>\n<\/div>\n

Cables \/ Connectors<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nRecommended
\nmanufacturer<\/strong><\/th>\n		Model<\/strong><\/th>\n<\/tr>\n
Products for
\nEtherNet\/IP
\n(100BASE-TX)<\/td>\n		Wire Gauge and
\nNumber of Pairs:
\nAWG24, 4-pair Cable<\/td>\n		Cables<\/td>\nHitachi Cable, Ltd.<\/td>\nNETSTAR-C5E SAB 0.5 \u00d7 4P
\n*1<\/strong><\/td>\n<\/tr>\n
Kuramo Electric Co.<\/td>\nKETH-SB *1<\/strong><\/td>\n<\/tr>\n
SWCC Showa Cable
\nSystems Co.<\/td>\n		FAE-5004 *1<\/strong><\/td>\n<\/tr>\n
RJ45 Connectors<\/td>\nPanduit Corporation<\/td>\nMPS588-C *1<\/strong><\/td>\n<\/tr>\n
Products for
\nEtherNet\/IP
\n(100BASE-TX)<\/td>\n		Wire Gauge and
\nNumber of Pairs:
\nAWG22, 2-pair Cable<\/td>\n		Cables<\/td>\nKuramo Electric Co.<\/td>\nKETH-PSB-OMR *2<\/strong><\/td>\n<\/tr>\n
JMACS Japan Co., Ltd.<\/td>\nPNET\/B *2<\/strong><\/td>\n<\/tr>\n
RJ45 Assembly
\nConnector
\n\"3412_lu_4_1\"<\/td>\n		OMRON<\/td>\nXS6G-T421-1 *2<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1. We recommend you to use above cable for EtherNet\/IP and RJ45 Connector together.
\n*2. We recommend you to use above cable for EtherNet\/IP and RJ45 Assembly Connector together.<\/p>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nPins for 10 Units (30 terminal block pins and 30 Unit pins)<\/td>\nNX-AUX02<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
No. of terminals<\/strong><\/th>\nTerminal number
\nindications<\/strong><\/th>\n		Ground
\nterminal mark<\/strong><\/th>\n		Terminal current
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/strong><\/th>\n8<\/td>\nA\/B<\/td>\nProvided<\/td>\n10 A<\/td>\nNX-TBC082<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\nPollution degree 2 or less: Conforms to JIS B 3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC 61000-4-4. 2 kV (power supply line)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B 3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>,
\n100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min
\ntotal) *1<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions *1<\/td>\n<\/tr>\n
Applicable standards *2<\/strong><\/th>\ncULus: Listed UL508, ANSI\/ISA 12.12.01
\nEU: EN 61131-2, C-Tick or RCM, KC: KC Registration<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Refer to the NX-series Digital I\/O Units User\u2019s Manual (Cat. No. W521) for the vibration and shock resistance
\nspecifications of the Relay Output Unit.
\n*2. Consult your OMRON representative for the most recent applicable standards for each model.<\/div>\n<\/div>\n<\/div>\n

EtherNet\/IP Coupler Unit Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nNX-EIC202<\/td>\n<\/tr>\n
Number of connectable
\nNX Units<\/strong><\/th>\n		63 Units max.*1<\/td>\n<\/tr>\n
Communications
\nprotocols<\/strong><\/th>\n		EtherNet\/IP<\/td>\n<\/tr>\n
UDP\/IP and TCP\/IP (Message Services)<\/td>\nNumber of buffers (sockets):
\n\u2022 8 message buffers for server
\n\u2022 No message buffers for client
\n\u2022 Shared buffers for UDP\/IP messages
\nand TCP\/IP messages
\nMaximum message size:
\n\u2022 Request: 492 bytes
\n\u2022 Response: 496 bytes
\nMaximum NX output data size:
\n\u2022 490 bytes
\nMaximum NX input data size:
\n\u2022 496 bytes<\/td>\n<\/tr>\n
Modulation<\/strong><\/th>\nBaseband<\/td>\n<\/tr>\n
Link speed<\/strong><\/th>\n100 Mbps<\/td>\n<\/tr>\n
Physical layer<\/strong><\/th>\n100BASE-TX (IEEE 802.3)<\/td>\n<\/tr>\n
Number of connections<\/strong><\/th>\n8<\/td>\n<\/tr>\n
Received Packet Interval
\n(RPI, refresh cycle)<\/strong><\/th>\n		4 to 1,000 ms<\/td>\n<\/tr>\n
Allowed communications
\nbandwidth addressing to the
\nlocal node<\/strong><\/th>\n		1,000 pps<\/td>\n<\/tr>\n
Topology<\/strong><\/th>\nLine, Tree, Star<\/td>\n<\/tr>\n
Ethernet Switch<\/strong><\/th>\nLayer 2 Ethernet switch<\/td>\n<\/tr>\n
Transmission media<\/strong><\/th>\nCategory 5 or higher twisted-pair cable (Recommended cable:
\ndouble-shielded cable with aluminum tape and braiding)<\/td>\n<\/tr>\n
Transmission distance<\/strong><\/th>\nDistance between nodes: 100 m or less<\/td>\n<\/tr>\n
NX bus I\/O data size<\/strong><\/th>\nInput: 512 bytes max. (including input data, status, and unused areas)
\nOutput: 512 bytes max. (including output data and unused areas)<\/td>\n<\/tr>\n
EtherNet\/IP I\/O connection
\nsize<\/strong><\/th>\n		Input: 504 bytes max. (including input data, status, and unused areas)
\nOutput: 504 bytes max. (including output data and unused areas)<\/td>\n<\/tr>\n
Refreshing methods<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Unit
\npower
\nsupply
\n*2<\/strong><\/th>\n		Power supply voltage<\/strong><\/th>\n24 VDC (20.4 to 28.8 VDC)<\/td>\n<\/tr>\n
NX Unit power supply
\ncapacity<\/strong><\/th>\n		10 W max. (Refer to Installation orientation and restrictions for details.)<\/td>\n<\/tr>\n
NX Unit power supply
\nefficiency<\/strong><\/th>\n		70%<\/td>\n<\/tr>\n
Isolation method<\/strong><\/th>\nNo isolation between NX Unit power supply and Unit power supply terminals<\/td>\n<\/tr>\n
Current capacity of
\npower supply
\nterminals<\/strong><\/th>\n		4 A max.<\/td>\n<\/tr>\n
I\/O
\npower
\nsupply
\n*2<\/strong><\/th>\n		Power supply voltage<\/strong><\/th>\n5 to 24 VDC (4.5 to 28.8 VDC) *3<\/td>\n<\/tr>\n
Maximum I\/O power
\nsupply current<\/strong><\/th>\n		10 A (Refer to Installation orientation and restrictions for details.)<\/td>\n<\/tr>\n
Current capacity of
\npower supply
\nterminals<\/strong><\/th>\n		10 A max.<\/td>\n<\/tr>\n
NX Unit power consumption<\/strong><\/th>\n1.60 W max.<\/td>\n<\/tr>\n
Current consumption from
\nI\/O power supply<\/strong><\/th>\n		10 mA max. (for 24 VDC)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC for 1 min, leakage current: 5 mA max. (between isolated circuits)<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n100 VDC, 20 M\u03a9 min. (between isolated circuits)<\/td>\n<\/tr>\n
External connection
\nterminals<\/strong><\/th>\n		Communications Connector
\nFor EtherNet\/IP communications.
\n\u2022 RJ45 \u00d7 2 (shielded)<\/td>\n<\/tr>\n
Screwless Clamping Terminal Block
\nFor Unit power supply, I\/O power supply, and grounding. Removable.<\/td>\n<\/tr>\n
Peripheral USB Port
\nFor Sysmac Studio connection.
\n\u2022 Physical layer: USB 2.0-compliant, B-type connector
\n\u2022 Transmission distance: 5 m max.<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n46 \u00d7 100 \u00d7 71 mm (W\u00d7H\u00d7D)<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n150 g max.<\/td>\n<\/tr>\n
Installation orientation
\nand restrictions<\/strong><\/th>\n		Installation orientation: 6 possible orientations
\nRestrictions:
\n\u2022 Used in the upright installation orientation.
\n\"3412_sp_2_1\"
\n\u2022 Used in any other orientation than the upright installation orientation.
\n\"3412_sp_2_2\"<\/td>\n<\/tr>\n
Circuit layout<\/strong><\/th>\n\"3412_sp_2_3\"<\/td>\n<\/tr>\n
Terminal arrangement<\/strong><\/th>\n\"3412_sp_2_4\"<\/td>\n<\/tr>\n
Accessory<\/strong><\/th>\nEnd Cover (NX-END01): 1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1. Refer to the NX-series Safety Control Unit User’s Manual (Cat. No. Z930) for the number of Safety Control Units that
\ncan be connected.
\n*2. Refer to the NX-series EtherNet\/IP\u2122Coupler Unit User\u2019s Manual (Cat. No. W536) for procedures for designing the
\nUnit power supply system and I\/O power supply system.
\n*3. Use a voltage that is appropriate for the I\/O circuits of the NX Units and the connected external devices.<\/p>\n<\/div>\n<\/div>\n

Configuration Unit<\/h4>\n
\n
\n

Refer to the user’s manuals for information on the NX Units that can be connected to the NX-series EtherNet\/IP Coupler Unit.<\/p>\n<\/div>\n<\/div>\n

EtherNet\/IP Coupler Unit<\/h4>\n
\n
\n
\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nNX-EIC202<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

I\/O Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
2-point Units<\/strong><\/th>\n4-point Units<\/strong><\/th>\n8-point Units<\/strong><\/th>\n16-point Units<\/strong><\/th>\n32-point Units<\/strong><\/th>\n<\/tr>\n
Digital Input Unit<\/strong><\/th>\n–<\/td>\nNX-ID3317
\nNX-ID3343
\nNX-ID3417
\nNX-ID3443
\nNX-IA3117<\/td>\n		NX-ID4342
\nNX-ID4442<\/td>\n		NX-ID5142-1
\nNX-ID5142-5
\nNX-ID5342
\nNX-ID5442<\/td>\n		NX-ID6142-5
\nNX-ID6142-6<\/td>\n<\/tr>\n
Digital Output Unit<\/strong><\/th>\nNX-OC2633
\nNX-OC2733<\/td>\n		NX-OD3121
\nNX-OD3153
\nNX-OD3256
\nNX-OD3257
\nNX-OD3268<\/td>\n		NX-OD4121
\nNX-OD4256
\nNX-OC4633<\/td>\n		NX-OD5121
\nNX-OD5121-1
\nNX-OD5121-5
\nNX-OD5256
\nNX-OD5256-1
\nNX-OD5256-5<\/td>\n		NX-OD6121-5
\nNX-OD6256-5<\/td>\n<\/tr>\n
Digital Mixed I\/O Unit<\/strong><\/th>\n–<\/td>\n–<\/td>\n–<\/td>\nNX-MD6121-5
\nNX-MD6121-6
\nNX-MD6256-5<\/td>\n		–<\/td>\n<\/tr>\n
Analog Input Unit<\/strong><\/th>\nNX-AD2603
\nNX-AD2604
\nNX-AD2608
\nNX-AD2203
\nNX-AD2204
\nNX-AD2208<\/td>\n		NX-AD3603
\nNX-AD3604
\nNX-AD3608
\nNX-AD3203
\nNX-AD3204
\nNX-AD3208<\/td>\n		NX-AD4603
\nNX-AD4604
\nNX-AD4608
\nNX-AD4203
\nNX-AD4204
\nNX-AD4208<\/td>\n		–<\/td>\n–<\/td>\n<\/tr>\n
Analog Output Unit<\/strong><\/th>\nNX-DA2603
\nNX-DA2605
\nNX-DA2203
\nNX-DA2205<\/td>\n		NX-DA3603
\nNX-DA3605
\nNX-DA3203
\nNX-DA3205<\/td>\n		–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
Temperature Input Unit<\/strong><\/th>\nNX-TS2101
\nNX-TS2102
\nNX-TS2104
\nNX-TS2201
\nNX-TS2202
\nNX-TS2204<\/td>\n		NX-TS3101
\nNX-TS3102
\nNX-TS3104
\nNX-TS3201
\nNX-TS3202
\nNX-TS3204<\/td>\n		–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
Heater Burnout
\nDetection Unit<\/strong><\/th>\n		–<\/td>\nNX-HB3101
\nNX-HB3201<\/td>\n		–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Temperature Control Units<\/h4>\n
\n
\n
\n\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
2CH<\/strong><\/th>\n4CH<\/strong><\/th>\n<\/tr>\n
Temperature Control Unit<\/strong><\/th>\nNX-TC2405, NX-TC2406, NX-TC2407,
\nNX-TC2408<\/td>\n		NX-TC3405, NX-TC3406, NX-TC3407,
\nNX-TC3408<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Load Cell Input Unit<\/h4>\n
\n
\n
\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Load Cell Input Unit<\/strong><\/th>\nNX-RS1201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Position Interface Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
1CH<\/strong><\/th>\n2CH<\/strong><\/th>\n<\/tr>\n
Incremental Encoder Input Unit<\/strong><\/th>\nNX-EC0112, NX-EC0122, NX-EC0132, NX-EC0142<\/td>\nNX-EC0212, NX-EC0222<\/td>\n<\/tr>\n
SSI Input Unit<\/strong><\/th>\nNX-ECS112<\/td>\nNX-ECS212<\/td>\n<\/tr>\n
Pulse Output Unit<\/strong><\/th>\nNX-PG0112, NX-PG0122<\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Communications Interface Units<\/h4>\n
\n
\n
\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Communications Interface Unit<\/strong><\/th>\nNX-CIF101, NX-CIF105, NX-CIF210<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

System Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Additional NX Unit Power Supply Unit<\/strong><\/th>\nNX-PD1000<\/td>\n<\/tr>\n
Additional I\/O Power Supply Unit<\/strong><\/th>\nNX-PF0630, NX-PF0730<\/td>\n<\/tr>\n
I\/O Power Supply Connection Unit<\/strong><\/th>\nNX-PC0010, NX-PC0020, NX-PC0030<\/td>\n<\/tr>\n
Shield Connection Unit<\/strong><\/th>\nNX-TBX01<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

IO-Link Master Unit<\/h4>\n
\n
\n
\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
IO-Link Master Unit<\/strong><\/th>\nNX-ILM400<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Safety Control Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
Unit<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Safety CPU Unit<\/strong><\/th>\nNX-SL3300 *1<\/td>\n<\/tr>\n
Safety Input Unit<\/strong><\/th>\nNX-SIH400 *2, NX-SID800<\/td>\n<\/tr>\n
Safety Output Unit<\/strong><\/th>\nNX-SOH200, NX-SOD400<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1 Safety CPU Unit Ver.1.1 or higher.
\n*2 Safety Input Unit Ver.1.1 or higher.<\/p>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n
\n
\n

Depending on the type and model of the Unit, some Units do not have all of the versions given in the corresponding versions. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

Connection to the NJ\/NX-series CPU Unit or NY-series Industrial PC<\/h4>\n

NX-series CPU Unit or NY-series Industrial PC<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version of
\nCPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac Studio
\nversion<\/strong><\/th>\n		Network Configurator
\nfor EtherNet\/IP
\nversion<\/strong><\/th>\n		CX-ConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.14<\/td>\nVer.1.19<\/td>\nVer.3.21<\/td>\nVer.2.4 *<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.<\/div>\n<\/div>\n<\/div>\n

NJ-series CPU Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version
\nof CPU Unit<\/strong><\/th>\n		Unit version
\nof
\nCJ1W-EIP21<\/strong><\/th>\n		Sysmac
\nStudio
\nversion<\/strong><\/th>\n		Network
\nConfigurator for
\nEtherNet\/IP
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.14<\/td>\nVer.2.1<\/td>\nVer.1.19<\/td>\nVer.3.21<\/td>\nVer.2.4 *<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\nNot possible.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
* The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.<\/div>\n<\/div>\n<\/div>\n

Connection to CS\/CJ\/CP-series CPU Unit<\/h4>\n

CS1G\/CS1H\/CJ1H\/CJ1M CPU Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version
\nof CPU Unit<\/strong><\/th>\n		Unit version
\nof
\nCS1W-EIP21\/
\nCJ1W-EIP21<\/strong><\/th>\n		Network
\nConfigurator for
\nEtherNet\/IP
\nversion<\/strong><\/th>\n		NX-IO
\nConfigurator
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.3.0<\/td>\nVer.2.1<\/td>\nVer.3.00<\/td>\nVer.1.00<\/td>\nVer.2.4 *1<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.00 *2<\/td>\nVer.2.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.
\n*2. You can connect only to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect with any other
\npath.<\/div>\n<\/div>\n<\/div>\n

CJ2H-CPU6[]\/CJ2M-CPU1[]\/CP1H CPU Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version
\nof CPU Unit<\/strong><\/th>\n		Unit version
\nof
\nCJ1W-EIP21<\/strong><\/th>\n		Network
\nConfigurator for
\nEtherNet\/IP
\nversion<\/strong><\/th>\n		NX-IO
\nConfigurator
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.0<\/td>\nVer.2.1<\/td>\nVer.3.00<\/td>\nVer.1.00<\/td>\nVer.2.4 *1<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.00 *2<\/td>\nVer.2.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.
\n*2. You can connect only to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect with any other
\npath.<\/div>\n<\/div>\n<\/div>\n

CJ2H-CPU6[]-EIP CPU Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version
\nof CPU Unit<\/strong><\/th>\n		Unit version
\nof
\nCJ1W-EIP21<\/strong><\/th>\n		Network
\nConfigurator for
\nEtherNet\/IP
\nversion<\/strong><\/th>\n		NX-IO
\nConfigurator
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.5<\/td>\nVer.2.1<\/td>\nVer.3.00<\/td>\nVer.1.00<\/td>\nVer.2.4 *1<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.00 *2<\/td>\nVer.2.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.
\n*2. You can connect only to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect with any other
\npath.<\/div>\n<\/div>\n<\/div>\n

CJ2M-CPU3[] CPU Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nUnit version
\nof CPU Unit<\/strong><\/th>\n		Unit version
\nof
\nCJ1W-EIP21<\/strong><\/th>\n		Network
\nConfigurator for
\nEtherNet\/IP
\nversion<\/strong><\/th>\n		NX-IO
\nConfigurator
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.0<\/td>\nVer.2.1<\/td>\nVer.3.21<\/td>\nVer.1.00<\/td>\nVer.2.4 *1<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.00 *2<\/td>\nVer.2.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.
\n*2. You can connect only to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect with any other
\npath.<\/div>\n<\/div>\n<\/div>\n

Connection to the Sysmac Gateway<\/h4>\n

Sysmac Gateway<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
EtherNet\/IP Coupler Unit<\/strong><\/th>\nCorresponding unit version\/version<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nSysmac Gateway
\nversion<\/strong><\/th>\n		Network Configurator
\nfor EtherNet\/IP version<\/strong><\/th>\n		NX-IO
\nConfigurator
\nversion<\/strong><\/th>\n		CX-
\nConfiguratorFDT
\nversion<\/strong><\/th>\n<\/tr>\n
NX-EIC202<\/td>\nVer.1.2<\/td>\nVer.1.31<\/td>\nVer.3.50<\/td>\nVer.1.00<\/td>\nVer.2.4 *1<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.00 *2<\/td>\nVer.2.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. The CX-ConfiguratorFDT with version 2.2 or later can be used if it is connected to the peripheral USB port on the
\nEtherNet\/IP Coupler Unit.
\n*2. You can connect only to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect with any other
\npath.<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n

EtherCAT Coupler Unit Only<\/h4>\n
\n
\"NX-EIC202<\/div>\n<\/div>\n

With Cables Connected<\/h4>\n
\n
\"NX-EIC202<\/div>\n
\n

*1. This dimension depends on the specifications of the commercially available USB-certified cable.
\nCheck the specifications of the USB cable that is used.
\n*2. This is the dimension from the back of the Unit to the communications cables.
\n\u2022 100 mm: When an MPS588-C Connector is used.
\n\u2022 120 mm: When an XS6G-T421-1 Connector is used.<\/p>\n<\/div>\n<\/div>\n

End Cover<\/h4>\n
\n
\"NX-EIC202<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n
\n
\n
\n
\n
\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-EIC Data Sheet<\/a><\/td>\n–
\n[2224KB]<\/span><\/td>\n		Aug 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n

<\/h2>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Connecting to open industrial network standard EtherNet\/IP<\/h2>\n","protected":false},"featured_media":1599,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[91,63,72],"product_tag":[],"_links":{"self":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product\/1598"}],"collection":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/comments?post=1598"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media\/1599"}],"wp:attachment":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media?parent=1598"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1598"},{"taxonomy":"product_tag","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1598"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}