{"id":1462,"date":"2019-01-02T18:11:34","date_gmt":"2019-01-02T18:11:34","guid":{"rendered":"http:\/\/store.al-tet.com\/?post_type=product&p=1462"},"modified":"2019-01-02T18:11:34","modified_gmt":"2019-01-02T18:11:34","slug":"cp1l","status":"publish","type":"product","link":"http:\/\/store.al-tet.com\/index.php\/product\/cp1l\/","title":{"rendered":"CP1L"},"content":{"rendered":"

\u2022 “CP1L-EM” and “CP1L-EL” have complete with a Ethernet port.<\/p>\n

\u2022 Pulse output for two axes. Advanced power for high-precision positioning control.<\/p>\n

\u2022 High-speed Counters. Single-phase for four axes.<\/p>\n

\u2022 Six interrupt inputs are built in. Faster processing of instructions speeds up the entire system.<\/p>\n

\u2022 Serial Communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.<\/p>\n

\u2022 “CP1L-M” and “CP1L-L” have a peripheral USB port.<\/p>\n

\u2022 The Structured Text (ST) Language. Makes math operations even easier.<\/p>\n

\u2022 Can be used for the CP1W series Unit. The extendibility of it is preeminently good.<\/p>\n

\u2022 LCD displays and settings. Enabled using Option Board.<\/p>\n

 <\/p>\n

Applicable standards<\/h4>\n
\n
\n

Refer to the OMRON website or ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

CPU Units<\/h4>\n

Built-in Ethernet port<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n
CPU Unit<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
CPU type<\/strong><\/th>\nPower
\nsupply<\/strong><\/th>\n		Output method<\/strong><\/th>\nInputs<\/strong><\/th>\nOut-
\nputs<\/strong><\/th>\n<\/tr>\n
CP1L-EM
\nCPU Units
\nwith
\n40 Points
\n\"1916_lu_1_1\"<\/strong><\/th>\n		Memory capacity:
\n10K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n24<\/td>\n16<\/td>\nCP1L-EM40DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-EM40DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-EM40DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-EM
\nCPU Units
\nwith
\n30 Points
\n\"1916_lu_1_2\"<\/strong><\/th>\n		Memory capacity:
\n10K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n18<\/td>\n12<\/td>\nCP1L-EM30DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-EM30DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-EM30DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-EL
\nCPU Units
\nwith
\n20 Points
\n\"1916_lu_1_3\"<\/strong><\/th>\n		Memory capacity:
\n5K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n12<\/td>\n8<\/td>\nCP1L-EL20DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-EL20DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-EL20DT1-D<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Built-in USB port<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
CPU Unit<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
CPU type<\/strong><\/th>\nPower
\nsupply<\/strong><\/th>\n		Output method<\/strong><\/th>\nInputs<\/strong><\/th>\nOutputs<\/strong><\/th>\n<\/tr>\n
CP1L-M CPU
\nUnits with
\n60 Points
\n\"1916_lu_2_1\"<\/strong><\/th>\n		Memory capacity:
\n10K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n36<\/td>\n24<\/td>\nCP1L-M60DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M60DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-M60DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M60DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-M60DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-M CPU
\nUnits with
\n40 Points
\n\"1916_lu_2_2\"<\/strong><\/th>\n		Memory capacity:
\n10K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n24<\/td>\n16<\/td>\nCP1L-M40DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M40DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-M40DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M40DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-M40DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-M CPU
\nUnits with
\n30 Points
\n\"1916_lu_2_3\"<\/strong><\/th>\n		Memory capacity:
\n10K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n18<\/td>\n12<\/td>\nCP1L-M30DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M30DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-M30DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-M30DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-M30DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-L CPU
\nUnits with
\n20 Points
\n\"1916_lu_2_4\"<\/strong><\/th>\n		Memory capacity:
\n5K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n12<\/td>\n8<\/td>\nCP1L-L20DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L20DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-L20DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L20DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-L20DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-L CPU
\nUnits with
\n14 Points
\n\"1916_lu_2_5\"<\/strong><\/th>\n		Memory capacity:
\n5K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n8<\/td>\n6<\/td>\nCP1L-L14DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L14DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-L14DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L14DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-L14DT1-D<\/strong><\/td>\n<\/tr>\n
CP1L-L CPU
\nUnits with
\n10 Point
\n\"1916_lu_2_6\"<\/strong><\/th>\n		Memory capacity:
\n5K steps
\nHigh-speed counters:
\n100 kHz, 4 axes
\nPulse outputs:
\n100 kHz, 2 axes
\n(Models with transistor
\noutputs only)<\/strong><\/th>\n		AC
\npower
\nsupply<\/td>\n		Relay output<\/td>\n6<\/td>\n4<\/td>\nCP1L-L10DR-A<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L10DT-A<\/strong><\/td>\n<\/tr>\n
DC
\npower
\nsupply<\/td>\n		Relay output<\/td>\nCP1L-L10DR-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sinking)<\/td>\n		CP1L-L10DT-D<\/strong><\/td>\n<\/tr>\n
Transistor output
\n(sourcing)<\/td>\n		CP1L-L10DT1-D<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: 1. Refer to “Models and Software Versions” about supported software.
\n2. Refer to “Option Unit Specifications” about supported Option Units.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and\/or other countries.
\nEtherNet\/IPTM<\/sup>\u00a0is the trademarks of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n<\/div>\n

Options for CPU Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
RS-232C
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_1\"<\/strong><\/th>\nCan be mounted in either CPU Unit Option Board slot 1 or 2. *1<\/td>\nCP1W-CIF01<\/strong><\/td>\n<\/tr>\n
RS-422A\/485
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_2\"<\/strong><\/th>\nCP1W-CIF11<\/strong><\/td>\n<\/tr>\n
RS-422A\/485
\n(Isolated-type)
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_3\"<\/strong><\/th>\nCP1W-CIF12-V1<\/strong><\/td>\n<\/tr>\n
Ethernet
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_4\"<\/strong><\/th>\nCan be mounted in either CPU Unit Option Board slot 1 or 2.
\n*1 *2 *4<\/td>\n		CP1W-CIF41<\/strong><\/td>\n<\/tr>\n
Analog Input
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_5\"<\/strong><\/th>\nCan be mounted in either CPU Unit Option Board slot 1 or 2. *3
\n2 analog inputs. 0-10V(Resolution:1\/4000), 0-20mA (Resolution:
\n1\/2000).<\/td>\n		CP1W-ADB21<\/strong><\/td>\n<\/tr>\n
Analog Output
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_6\"<\/strong><\/th>\nCan be mounted in either CPU Unit Option Board slot 1 or 2. *3
\n2 analog outputs. 0-10V (Resolution:1\/4000).<\/td>\n		CP1W-DAB21V<\/strong><\/td>\n<\/tr>\n
Analog I\/O
\nOption Board<\/strong><\/th>\n		\"1916_lu_3_7\"<\/strong><\/th>\nCan be mounted in either CPU Unit Option Board slot 1 or 2. *3
\n2 analog inputs. 0-10V (Resolution:1\/4000), 0-20mA (Resolution:
\n1\/2000).
\n2 analog outputs. 0-10V (Resolution:1\/4000).<\/td>\n		CP1W-MAB221<\/strong><\/td>\n<\/tr>\n
LCD Option
\nBoard<\/strong><\/th>\n		\"1916_lu_3_8\"<\/strong><\/th>\nCan be mounted only in the CPU Unit Option Board slot 1. *1<\/td>\nCP1W-DAM01<\/strong><\/td>\n<\/tr>\n
Memory
\nCassette<\/strong><\/th>\n		\"1916_lu_3_9\"<\/strong><\/th>\nCan be used for backing up programs or auto-booting.<\/td>\nCP1W-ME05M<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

*1. Cannot be used for the CP1L-L10.
\n*2. When using CP1W-CIF41 Ver.1.0, one Ethernet port can be added.
\n*3. CP1L-EM\/EL only.
\n*4. Cannot be used for the CP1L-EM\/EL.<\/p>\n<\/div>\n<\/div>\n

Programming Devices<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
<\/th>\nNumber
\nof
\nlicenses<\/strong><\/th>\n		Media<\/strong><\/th>\n<\/tr>\n
FA
\nIntegrated
\nTool
\nPackage
\nCX-One Lite
\nVersion 4.[]<\/strong><\/th>\n		CX-One Lite is a subset of the complete CX-One
\npackage that provides only the Support Software
\nrequired for micro PLC applications.
\nCX-One Lite runs on the following OS.
\nOS: Windows XP (Service Pack 3 or higher, 32-bit
\nversion)\/Windows Vista (32-bit\/64-bit version)\/
\nWindows 7 (32-bit\/64-bit version)\/Windows 8 (32-
\nbit\/64-bit version)\/Windows 8.1 (32-bit\/64-bit
\nversion)\/Windows 10 (32-bit\/64-bit version)<\/p>\n

CX-One Lite Ver. 4.[] includes Micro PLC Edition
\nCX-Programmer Ver. 9.[].<\/td>\n

1 license<\/td>\nDVD<\/td>\nCXONE-LT01D-V4<\/strong><\/td>\n<\/tr>\n
FA
\nIntegrated
\nTool
\nPackage
\nCX-One
\nVer.4.[]<\/strong><\/th>\n		CX-One is a package that integrates the Support
\nSoftware for OMRON PLCs and components. CX-
\nOne runs on the following OS.
\nOS: Windows XP (Service Pack 3 or higher, 32-bit
\nversion)\/Windows Vista (32-bit\/64-bit version)\/
\nWindows 7 (32-bit\/64-bit version)\/Windows 8 (32-
\nbit\/64-bit version)\/Windows 8.1 (32-bit\/64-bit
\nversion)\/Windows 10 (32-bit\/64-bit version)<\/p>\n

CX-One Ver. 4.[] includes CX-Programmer Ver. 9.[].<\/td>\n

1 license
\n*1<\/td>\n		DVD<\/td>\nCXONE-AL01D-V4<\/strong><\/td>\n<\/tr>\n
Programming
\nDevice
\nConnecting
\nCable for
\nCP1W-CIF01
\nRS-232C
\nOption
\nBoard *2<\/strong><\/th>\n		Connects Personal Computers, D-Sub 9-pin
\n(Length: 2.0 m)<\/td>\n		For anti-static
\nconnectors<\/td>\n		XW2Z-200S-CV<\/strong><\/td>\n<\/tr>\n
Connects Personal Computers, D-Sub 9-pin
\n(Length: 5.0 m)<\/td>\n		XW2Z-500S-CV<\/strong><\/td>\n<\/tr>\n
Connects Personal Computers, D-Sub 9-pin (Length: 2.0 m)<\/td>\nXW2Z-200S-V<\/strong><\/td>\n<\/tr>\n
Connects Personal Computers, D-Sub 9-pin (Length: 5.0 m)<\/td>\nXW2Z-500S-V<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
Note: 1. Refer to “Models and Software Versions” about supported software.
\n2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
\n*1. Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
\n*2. Cannot be used with a peripheral USB port.
\nTo connect to a personal computer via a peripheral USB port, use commercially-available USB cable (A or B type, male).<\/div>\n<\/div>\n<\/div>\n
\n
\n

The following tables lists the Support Software that can be installed from CX-One<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Support Software in CX-One<\/strong><\/th>\nCX-One Lite Ver.4.[]<\/strong><\/th>\nCX-One Ver.4.[]<\/strong><\/th>\n<\/tr>\n
Micro PLC Edition CX-Programmer<\/td>\nVer.9.[]<\/td>\nYes<\/td>\nNo<\/td>\n<\/tr>\n
CX-Programmer<\/td>\nVer.9.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Integrator<\/td>\nVer.2.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Switch Box Utility<\/td>\nVer.1.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-Protocol<\/td>\nVer.1.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Simulator<\/td>\nVer.1.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-Position<\/td>\nVer.2.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Motion-NCF<\/td>\nVer.1.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Motion-MCH<\/td>\nVer.2.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Motion<\/td>\nVer.2.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Drive<\/td>\nVer.2.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-Process Tool<\/td>\nVer.5.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
Faceplate Auto-Builder for NS<\/td>\nVer.3.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
CX-Designer<\/td>\nVer.3.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
NV-Designer<\/td>\nVer.1.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-Thermo<\/td>\nVer.4.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-ConfiguratorFDT<\/td>\nVer.1.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-FLnet<\/td>\nVer.1.[]<\/td>\nNo<\/td>\nYes<\/td>\n<\/tr>\n
Network Configurator<\/td>\nVer.3.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
CX-Server<\/td>\nVer.4.[]<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: For details, refer to the CX-One Catalog (Cat. No: R134).<\/p>\n<\/div>\n<\/div>\n

Models and Software Versions<\/h4>\n
\n
\n

The following versions of the CX-One, CX-Programmer are required.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n\n
Model<\/strong><\/th>\nCX-One<\/strong><\/td>\nCX-Programmer<\/strong><\/th>\n<\/tr>\n
CP1L-EM40[][]-[]
\nCP1L-EM30[][]-[]
\nCP1L-EL20[][]-[]<\/strong><\/th>\n		*1<\/td>\nVer. 4.25 or higher<\/td>\nVer. 9.40 or higher<\/td>\n<\/tr>\n
CP1L-M60[][]-[]<\/strong><\/th>\n*2<\/td>\nVer. 2.11 or higher<\/td>\nVer. 7.20 or higher<\/td>\n<\/tr>\n
CP1L-M40[][]-[]
\nCP1L-M30[][]-[]
\nCP1L-M20[][]-[]
\nCP1L-L14[][]-[]<\/strong><\/th>\n		*2<\/td>\nVer. 2.10 or higher<\/td>\nVer. 7.10 or higher<\/td>\n<\/tr>\n
CP1L-L10[][]-[]<\/strong><\/th>\n*2<\/td>\nVer. 2.13 or higher<\/td>\nVer. 7.30 or higher<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
*1. Update The CX-Programmer version automatically from the website using CX-Programmer version 9.0 (included with
\nCX-One version 4.0).
\n*2. Update The CX-Programmer version automatically from the website using CX-Programmer version 7.0 (included with
\nCX-One version 2.0).<\/div>\n<\/div>\n<\/div>\n

Expansion Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Inputs<\/strong><\/th>\nOutputs<\/strong><\/th>\nOutput type<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Input Unit<\/strong><\/th>\n8<\/td>\n—<\/td>\n24 VDC Input<\/td>\nCP1W-8ED<\/strong><\/td>\n<\/tr>\n
Output Units
\n\"1916_lu_7_1\"<\/strong><\/th>\n		—<\/td>\n8<\/td>\nRelay<\/td>\nCP1W-8ER<\/strong><\/td>\n<\/tr>\n
Transistor (sinking)<\/td>\nCP1W-8ET<\/strong><\/td>\n<\/tr>\n
Transistor (sourcing)<\/td>\nCP1W-8ET1<\/strong><\/td>\n<\/tr>\n
—<\/td>\n16<\/td>\nRelay<\/td>\nCP1W-16ER<\/strong><\/td>\n<\/tr>\n
Transistor (sinking)<\/td>\nCP1W-16ET<\/strong><\/td>\n<\/tr>\n
Transistor (sourcing)<\/td>\nCP1W-16ET1<\/strong><\/td>\n<\/tr>\n
—<\/td>\n32<\/td>\nRelay<\/td>\nCP1W-32ER<\/strong><\/td>\n<\/tr>\n
Transistor (sinking)<\/td>\nCP1W-32ET<\/strong><\/td>\n<\/tr>\n
Transistor (sourcing)<\/td>\nCP1W-32ET1<\/strong><\/td>\n<\/tr>\n
I\/O Units
\n\"1916_lu_7_2\"<\/strong><\/th>\n		12<\/td>\n8<\/td>\nRelay<\/td>\nCP1W-20EDR1<\/strong><\/td>\n<\/tr>\n
Transistor (sinking)<\/td>\nCP1W-20EDT<\/strong><\/td>\n<\/tr>\n
Transistor (sourcing)<\/td>\nCP1W-20EDT1<\/strong><\/td>\n<\/tr>\n
24<\/td>\n16<\/td>\nRelay<\/td>\nCP1W-40EDR<\/strong><\/td>\n<\/tr>\n
Transistor (sinking)<\/td>\nCP1W-40EDT<\/strong><\/td>\n<\/tr>\n
Transistor (sourcing)<\/td>\nCP1W-40EDT1<\/strong><\/td>\n<\/tr>\n
Analog
\nInput Unit
\n\"1916_lu_7_3\"<\/strong><\/th>\n		4CH<\/td>\n—<\/td>\nInput range:
\n0 to 5 V, 1 to 5 V, 0 to 10 V, \u00b110 V,
\n0 to 20 mA, or 4 to 20 mA.<\/td>\n		Resolution:
\n1\/6000<\/td>\n		CP1W-AD041<\/strong><\/td>\n<\/tr>\n
Resolution:
\n1\/12000<\/td>\n		CP1W-AD042<\/strong><\/td>\n<\/tr>\n
Analog
\nOutput Unit
\n\"1916_lu_7_4\"<\/strong><\/th>\n		—<\/td>\n2CH<\/td>\nOutput range:
\n1 to 5 V, 0 to 10 V, \u00b110 V, 0 to 20 mA,
\nor 4 to 20 mA.<\/td>\n		Resolution:
\n1\/6000<\/td>\n		CP1W-DA021<\/strong><\/td>\n<\/tr>\n
—<\/td>\n4CH<\/td>\nResolution:
\n1\/6000<\/td>\n		CP1W-DA041<\/strong><\/td>\n<\/tr>\n
Resolution:
\n1\/12000<\/td>\n		CP1W-DA042<\/strong><\/td>\n<\/tr>\n
Analog
\nI\/O Unit
\n\"1916_lu_7_5\"<\/strong><\/th>\n		4CH<\/td>\n4CH<\/td>\nInput range:
\n0 to 5 V, 1 to 5 V, 0 to 10 V, \u00b110 V,
\n0 to 20 mA, or 4 to 20 mA.
\nOutput range:
\n1 to 5 V, 0 to 10 V, \u00b110 V, 0 to 20 mA,
\nor 4 to 20 mA.<\/td>\n		Resolution:
\n1\/12000<\/td>\n		CP1W-MAD44<\/strong><\/td>\n<\/tr>\n
4CH<\/td>\n2CH<\/td>\nResolution:
\n1\/12000<\/td>\n		CP1W-MAD42<\/strong><\/td>\n<\/tr>\n
2CH<\/td>\n1CH<\/td>\nResolution:
\n1\/6000<\/td>\n		CP1W-MAD11<\/strong><\/td>\n<\/tr>\n
Temperature
\nSensor Unit
\n\"1916_lu_7_6\"<\/strong><\/th>\n		2CH<\/td>\n—<\/td>\nSensor type: Thermocouple (J or K)<\/td>\nCP1W-TS001<\/strong><\/td>\n<\/tr>\n
4CH<\/td>\n—<\/td>\nSensor type: Thermocouple (J or K)<\/td>\nCP1W-TS002<\/strong><\/td>\n<\/tr>\n
2CH<\/td>\n—<\/td>\nSensor type: Platinum resistance thermometer
\n(Pt100 or JPt100)<\/td>\n		CP1W-TS101<\/strong><\/td>\n<\/tr>\n
4CH<\/td>\n—<\/td>\nSensor type: Platinum resistance thermometer
\n(Pt100 or JPt100)<\/td>\n		CP1W-TS102<\/strong><\/td>\n<\/tr>\n
4CH<\/td>\n—<\/td>\nSensor type: Thermocouple (J or K)
\n2 channels can be used as analog input.
\nInput range: 1 to 5 V, 0 to 10 V, 4-20 mA<\/td>\n		Resolution:
\n1\/12000<\/td>\n		CP1W-TS003<\/strong><\/td>\n<\/tr>\n
12CH<\/td>\n—<\/td>\nSensor type: Thermocouple (J or K)<\/td>\nCP1W-TS004<\/strong><\/td>\n<\/tr>\n
CompoBus\/S
\nI\/O Link Unit
\n\"1916_lu_7_7\"<\/strong><\/th>\n		8<\/td>\n8<\/td>\nCompoBus\/S slave<\/td>\nCP1W-SRT21<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: CP1L (L Type) CPU Units with 10 points do not support Expansion Units.<\/p>\n<\/div>\n<\/div>\n

I\/O Connecting Cable<\/h4>\n
\n
\n
\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
I\/O Connecting Cable<\/strong><\/th>\n80 cm (for CP1W\/CPM1A Expansion Units)<\/td>\nCP1W-CN811<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: An I\/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion Units.<\/p>\n<\/div>\n<\/div>\n

Optional Products, Maintenance Products and DIN Track Accessories<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n
Name<\/strong><\/th>\nSpecifications<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Battery Set<\/strong><\/th>\nFor CPU Units (Use batteries within two years of manufacture.)<\/td>\nCJ1W-BAT01<\/strong><\/td>\n<\/tr>\n
DIN Track<\/strong><\/th>\nLength: 0.5 m; Height: 7.3 mm<\/td>\nPFP-50N<\/strong><\/td>\n<\/tr>\n
Length: 1 m; Height: 7.3 mm<\/td>\nPFP-100N<\/strong><\/td>\n<\/tr>\n
Length: 1 m; Height: 16 mm<\/td>\nPFP-100N2<\/strong><\/td>\n<\/tr>\n
<\/th>\nEnd Plate<\/strong><\/th>\nA stopper to secure the Units on the DIN Track.<\/td>\nPFP-M<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Industrial Switching Hubs<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Appear-
\nance<\/strong><\/th>\n		Specifications<\/strong><\/th>\nAccessories<\/strong><\/th>\nCurrent
\ncon-
\nsump-
\ntion
\n(A)<\/strong><\/th>\n		Model<\/strong><\/th>\n<\/tr>\n
<\/th>\nNo.
\nof
\nports<\/strong><\/th>\n		Failure
\nde-
\ntection<\/strong><\/th>\n<\/tr>\n
Industrial
\nSwitching
\nHubs<\/strong><\/th>\n		\"1916_lu_10_1\"<\/td>\nQuality of Service (QoS):
\nEtherNet\/IP\u2122 control
\ndata priority
\nFailure detection:
\nBroadcast storm and
\nLSI error detection
\n10\/100BASE-TX,
\nAuto-Negotiation<\/td>\n		3<\/td>\nNo<\/td>\nPower supply
\nconnector<\/td>\n		0.22<\/td>\nW4S1-03B<\/strong><\/td>\n<\/tr>\n
\"1916_lu_10_2\"<\/td>\n5<\/td>\nNo<\/td>\n0.22<\/td>\nW4S1-05B<\/strong><\/td>\n<\/tr>\n
5<\/td>\nYes<\/td>\nPower supply
\nconnector
\nConnector for
\ninforming error<\/td>\n		0.22<\/td>\nW4S1-05C<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Type<\/strong><\/th>\nAC power supply models<\/strong><\/th>\nDC power supply models<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nCP1L-[][][]-A<\/strong><\/th>\nCP1L-[][][]-D<\/strong><\/th>\n<\/tr>\n
Power supply<\/strong><\/th>\n100 to 240 VAC 50\/60 Hz<\/td>\n24 VDC<\/td>\n<\/tr>\n
Operating voltage
\nrange<\/strong><\/th>\n		85 to 264 VAC<\/td>\n20.4 to 26.4 VDC<\/td>\n<\/tr>\n
Power consumption<\/strong><\/th>\n50 VA max. (CP1L-M60\/-M40\/-M30[][]-A)
\n30 VA max. (CP1L-L20\/-L14\/-L10[][]-A)<\/td>\n		20 W max. (CP1L-EM40\/-EM30\/-M60\/-M40\/
\n-M30[][]-D)
\n13 W max. (CP1L-EL20\/-L20\/-L14\/
\n-L10[][]-D)<\/td>\n<\/tr>\n
Inrush current *<\/strong><\/th>\n100 to 120 VAC inputs:
\n20 A max. (for cold start at room
\ntemperature)
\n8 ms max.
\n200 to 240 VAC inputs:
\n40 A max. (for cold start at room
\ntemperature),
\n8 ms max.<\/td>\n		30 A max. (for cold start at room
\ntemperature)
\n20 ms max.<\/td>\n<\/tr>\n
External power supply<\/strong><\/th>\n300 mA at 24 VDC (CP1L-M60\/-M40\/
\n-M30[][]-A)
\n200 mA at 24 VDC (CP1L-L20\/-L14\/
\n-L10[][]-A)<\/td>\n		None<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. (at 500 VDC) between the
\nexternal AC terminals and GR terminals<\/td>\n		No insulation between primary and secondary
\nfor DC power supply<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n2,300 VAC at 50\/60 Hz for 1 min between
\nthe external AC and GR terminals, leakage
\ncurrent: 5 mA max.<\/td>\n		No insulation between primary and secondary
\nfor DC power supply<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC 61000-4-4. 2 kV (power supply line)<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nCP1L-L\/M:
\nConforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration:
\n9.8 m\/s2<\/sup>\u00a0in X, Y, and Z directions for 80 minutes each. Sweep time: 8 minutes \u00d7 10 sweeps
\n= total time of 80 minutes)
\nCP1L-EL\/EM:
\n5 to 8.4 Hz, 3.5 mm amplitude, 8.4 to 150 Hz, acceleration: 9.8 m\/s2<\/sup>\u00a0in X, Y, and Z directions
\nfor 100 minutes each (time coefficient of 10 minutes \u00d7 coefficient factor of 10 = total time
\nof 100 minutes)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to JIS C60068-2-27. 147 m\/s2<\/sup>\u00a0three times each in X, Y, and Z directions<\/td>\n<\/tr>\n
Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient humidity<\/strong><\/th>\n10% to 90% (with no condensation)<\/td>\n<\/tr>\n
Ambient operating
\nenvironment<\/strong><\/th>\n		No corrosive gas<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-20 to 75\u00b0C (Excluding battery.)<\/td>\n<\/tr>\n
Power holding time<\/strong><\/th>\n10 ms min.<\/td>\n2 ms min.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* The above values are for a cold start at room temperature for an AC power supply, and for a cold start for a DC power
\nsupply.
\n\u2022 A thermistor (with low-temperature current suppression characteristics) is used in the inrush current control circuitry
\nfor\u00a0the AC power supply. The thermistor will not be sufficiently cooled if the ambient temperature is high or if a hot
\nstart\u00a0is performed when the power supply has been OFF for only a short time. In those cases the inrush current
\nvalues may\u00a0be higher (as much as two times higher) than those shown above. Always allow for this when selecting
\nfuses and\u00a0breakers for external circuits.
\n\u2022 A capacitor charge-type delay circuit is used in the inrush current control circuitry for the DC power supply. The
\ncapacitor will not be charged if a hot start is performed when the power supply has been OFF for only a short time,
\nso in those cases the inrush current values may be higher (as much as two times higher) than those shown above.<\/p>\n<\/div>\n<\/div>\n

Performance Specifications<\/h4>\n

CP1L CPU Unit (EM\/EL Type)<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Type<\/strong><\/th>\nCP1L-EM40 (40 points)<\/strong><\/th>\nCP1L-EM30 (30 points)<\/strong><\/th>\nCP1L-EL20 (20 points)<\/strong><\/th>\n<\/tr>\n
Models<\/strong><\/th>\nCP1L-EM40D[]-[]<\/strong><\/th>\nCP1L-EM30D[]-[]<\/strong><\/th>\nCP1L-EL20D[]-[]<\/strong><\/th>\n<\/tr>\n
Control method<\/strong><\/th>\nStored program method<\/td>\n<\/tr>\n
I\/O control method<\/strong><\/th>\nCyclic scan with immediate refreshing<\/td>\n<\/tr>\n
Program language<\/strong><\/th>\nLadder diagram<\/td>\n<\/tr>\n
Function blocks<\/strong><\/th>\nMaximum number of function block definitions: 128 Maximum number of instances: 256
\nLanguages usable in function block definitions: Ladder diagrams, structured text (ST)<\/td>\n<\/tr>\n
Instruction length<\/strong><\/th>\n1 to 7 steps per instruction<\/td>\n<\/tr>\n
Instructions<\/strong><\/th>\nApprox. 500 (function codes: 3 digits)<\/td>\n<\/tr>\n
Instruction execution time<\/strong><\/th>\nBasic instructions: 0.55 \u03bcs min. Special instructions: 4.1 \u03bcs min.<\/td>\n<\/tr>\n
Common processing time<\/strong><\/th>\n0.4ms<\/td>\n<\/tr>\n
Program capacity<\/strong><\/th>\n10K steps<\/td>\n5K steps<\/td>\n<\/tr>\n
<\/th>\nFB program
\nmemory<\/strong><\/th>\n		10K steps<\/td>\n<\/tr>\n
Number of tasks<\/strong><\/th>\n288 (32 cyclic tasks and 256 interrupt tasks)<\/td>\n<\/tr>\n
<\/th>\nScheduled
\ninterrupt tasks<\/strong><\/th>\n		1 (interrupt task No. 2, fixed)<\/td>\n<\/tr>\n
Input interrupt
\ntasks<\/strong><\/th>\n		6 (interrupt task No. 140 to 145, fixed)<\/td>\n<\/tr>\n
(High-speed counter interrupts and interrupt tasks specified by external interrupts can
\nalso be executed.)<\/td>\n<\/tr>\n
Maximum subroutine
\nnumber<\/strong><\/th>\n		256<\/td>\n<\/tr>\n
Maximum jump number<\/strong><\/th>\n256<\/td>\n<\/tr>\n
I\/O
\nareas<\/strong><\/th>\n		Input Area<\/strong><\/th>\n1,600 bits (100 words) CIO 0 to CIO 99<\/td>\n<\/tr>\n
<\/td>\nBuilt-in Input
\nArea<\/strong><\/th>\n		24 bits: CIO 0.00 to CIO
\n0.11 and CIO 1.00 to CIO
\n1.11<\/td>\n		18 bits: CIO 0.00 to CIO
\n0.11 and CIO 1.00 to CIO
\n1.05<\/td>\n		12 bits: CIO 0.00 to CIO 0.11<\/td>\n<\/tr>\n
Output Area<\/strong><\/th>\n1,600 bits (100 words) CIO 100 to CIO 199<\/td>\n<\/tr>\n
<\/td>\nBuilt-in Output
\nArea<\/strong><\/th>\n		16 bits: CIO 100.00 to CIO
\n100.07 and CIO 101.00 to
\nCIO 101.07<\/td>\n		12 bits: CIO 100.00 to CIO
\n100.07 and CIO 101.00 to
\nCIO 101.03<\/td>\n		8 bits: CIO 100.00 to CIO
\n100.07<\/td>\n<\/tr>\n
1:1 Link Area<\/strong><\/th>\n256 bits (16 words): CIO 3000.00 to CIO 3015.15 (CIO 3000 to CIO 3015)<\/td>\n<\/tr>\n
Serial PLC Link
\nArea<\/strong><\/th>\n		1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)<\/td>\n<\/tr>\n
Work bits<\/strong><\/th>\n4,800 bits (300 words): CIO 1200.00 to CIO 1499.15 (words CIO 1200 to CIO 1499)
\n6,400 bits (400 words): CIO 1500.00 to CIO 1899.15 (words CIO 1500 to CIO 1899)
\n15,360 bits (960 words): CIO 2000.00 to CIO 2959.15 (words CIO 2000 to CIO 2959)
\n9,600 bits (600 words): CIO 3200.00 to CIO 3799.15 (words CIO 3200 to CIO 3799)
\n37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (words CIO 3800 to CIO 6143)<\/td>\n<\/tr>\n
TR Area<\/strong><\/th>\n16 bits: TR0 to TR15<\/td>\n<\/tr>\n
Holding Area<\/strong><\/th>\n8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)<\/td>\n<\/tr>\n
AR Area<\/strong><\/th>\nRead-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447)
\nRead\/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)<\/td>\n<\/tr>\n
Timers<\/strong><\/th>\n4,096 timer numbers: T0 to T4095<\/td>\n<\/tr>\n
Counters<\/strong><\/th>\n4,096 counter numbers: C0 to C4095<\/td>\n<\/tr>\n
DM Area<\/strong><\/th>\n32 Kwords: D0 to D32767<\/td>\n10 Kwords: D0 to D9999,
\nD32000 to D32767<\/td>\n<\/tr>\n
Data Register Area<\/strong><\/th>\n16 registers (16 bits): DR0 to DR15<\/td>\n<\/tr>\n
Index Register Area<\/strong><\/th>\n16 registers (32 bits): IR0 to IR15<\/td>\n<\/tr>\n
Task Flag Area<\/strong><\/th>\n32 flags (32 bits): TK0000 to TK0031<\/td>\n<\/tr>\n
Trace Memory<\/strong><\/th>\n4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)<\/td>\n<\/tr>\n
Memory Cassette<\/strong><\/th>\nA special Memory Cassette (CP1W-ME05M) can be mounted.
\nNote: Can be used for program backups and auto-booting.<\/td>\n<\/tr>\n
Clock function<\/strong><\/th>\nSupported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature:
\n55\u00b0C),
\n-2.0 min to +2.0 min (ambient temperature: 25\u00b0C), -2.5 min to +1.5 min (ambient
\ntemperature: 0\u00b0C)<\/td>\n<\/tr>\n
Communications functions<\/strong><\/th>\nBuilt-in Ethernet Port (Connecting Support Software, Message Communications,
\nSocket Service)<\/td>\n<\/tr>\n
A maximum of two Serial Communications Option
\nBoards can be mounted.<\/td>\n		A maximum of one Serial
\nCommunications Option
\nBoard can be mounted.<\/td>\n<\/tr>\n
Memory backup<\/strong><\/th>\nFlash memory: User programs, parameters (such as the PLC Setup), comment data,
\nand the entire DM Area can be saved to flash memory as initial values.
\nBattery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed
\nup by a battery.<\/td>\n<\/tr>\n
Battery service life<\/strong><\/th>\nService life expectancy is 5 years at 25\u00b0C, less at higher temperatures. (From 0.75
\nto 5 years depending on model, power supply rate, and ambient temperature.)<\/td>\n<\/tr>\n
Built-in input terminals<\/strong><\/th>\n40 (24 inputs, 16 outputs)<\/td>\n30 (18 inputs, 12 outputs)<\/td>\n20 (12 inputs, 8 outputs)<\/td>\n<\/tr>\n
Number of connectable
\nExpansion Units and
\nExpansion I\/O Units<\/strong><\/th>\n		CP-series Expansion Unit and Expansion I\/O Units:
\n3 max.<\/td>\n		CP-series Expansion Units
\nand Expansion I\/O Units:
\n1 max.<\/td>\n<\/tr>\n
Max. number of I\/O points<\/strong><\/th>\n160 (40 built in + 40 per
\nExpansion (I\/O) Unit x 3
\nUnits)<\/td>\n		150 (30 built in + 40 per
\nExpansion (I\/O) Unit x 3
\nUnits)<\/td>\n		60 (20 built in + 40 per
\nExpansion (I\/O) Unit x 1
\nUnit)<\/td>\n<\/tr>\n
Interrupt inputs<\/strong><\/th>\n6 inputs (Response time: 0.3 ms)<\/td>\n<\/tr>\n
Interrupt inputs counter
\nmode<\/strong><\/th>\n		6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down
\ncounters<\/td>\n<\/tr>\n
Quick-response inputs<\/strong><\/th>\n6 points (Min. input pulse width: 50 \u03bcs max.)<\/td>\n<\/tr>\n
Scheduled interrupts<\/strong><\/th>\n1<\/td>\n<\/tr>\n
High-speed counters<\/strong><\/th>\n4 inputs\/2 axes (24 VDC)
\nDifferential phases (4x), 50 kHz
\nSingle-phase (pulse plus direction, up\/down, increment), 100 kHz
\nValue range: 32 bits, Linear mode or ring mode
\nInterrupts: Target value comparison or range comparison<\/td>\n<\/tr>\n
Pulse
\noutputs
\n(models
\nwith
\ntransistor
\noutputs
\nonly)<\/strong><\/th>\n		Pulse outputs<\/strong><\/th>\nTrapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed)
\n2 outputs, 1 Hz to 100 kHz (CCW\/CW or pulse plus direction)<\/td>\n<\/tr>\n
PWM outputs<\/strong><\/th>\nDuty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%)
\n2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz
\n(Accuracy: +1%\/0% at 0.1 Hz to 10,000 Hz and +5%\/0% at 10,000 Hz to 32,800 Hz)<\/td>\n<\/tr>\n
Analog input<\/strong><\/th>\n2 input (Resolution: 1\/1000, Input range: 0 to 10 V). Not isolated.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

CP1L CPU Unit (M\/L Type)<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Type<\/strong><\/th>\nCP1L-M60
\n(60 points)<\/strong><\/th>\n		CP1L-M40
\n(40 points)<\/strong><\/th>\n		CP1L-M30
\n(30 points)<\/strong><\/th>\n		CP1L-L20
\n(20 points)<\/strong><\/th>\n		CP1L-L14
\n(14 points)<\/strong><\/th>\n		CP1L-L10
\n(10 points)<\/strong><\/th>\n<\/tr>\n
Models<\/strong><\/th>\nCP1L-
\nM60[][]-[]<\/strong><\/th>\n		CP1L-
\nM40[][]-[]<\/strong><\/th>\n		CP1L-
\nM30[][]-[]<\/strong><\/th>\n		CP1L-
\nL20[][]-[]<\/strong><\/th>\n		CP1L-
\nL14[][]-[]<\/strong><\/th>\n		CP1L-
\nL10[][]-[]<\/strong><\/th>\n<\/tr>\n
Control method<\/strong><\/th>\nStored program method<\/td>\n<\/tr>\n
I\/O control method<\/strong><\/th>\nCyclic scan with immediate refreshing<\/td>\n<\/tr>\n
Program language<\/strong><\/th>\nLadder diagram<\/td>\n<\/tr>\n
Function blocks<\/strong><\/th>\nMaximum number of function block definitions: 128 Maximum number of instances: 256
\nLanguages usable in function block definitions: Ladder diagrams, structured text (ST)<\/td>\n<\/tr>\n
Instruction length<\/strong><\/th>\n1 to 7 steps per instruction<\/td>\n<\/tr>\n
Instructions<\/strong><\/th>\nApprox. 500 (function codes: 3 digits)<\/td>\n<\/tr>\n
Instruction execution
\ntime<\/strong><\/th>\n		Basic instructions: 0.55 \u03bcs min. Special instructions: 4.1 \u03bcs min.<\/td>\n<\/tr>\n
Common processing
\ntime<\/strong><\/th>\n		0.4 ms<\/td>\n<\/tr>\n
Program capacity<\/strong><\/th>\n10K steps<\/td>\n5K steps<\/td>\n<\/tr>\n
Number of tasks<\/strong><\/th>\n288 (32 cyclic tasks and 256 interrupt tasks)<\/td>\n<\/tr>\n
<\/th>\nScheduled
\ninterrupt
\ntasks<\/strong><\/th>\n		1 (interrupt task No. 2, fixed)<\/td>\n<\/tr>\n
Input
\ninterrupt
\ntasks<\/strong><\/th>\n		6 (interrupt task No. 140 to 145, fixed)<\/td>\n4 (interrupt
\ntask No. 140
\nto 143, fixed)<\/td>\n		2 (interrupt
\ntask No. 140
\nto 141, fixed)<\/td>\n<\/tr>\n
(Interrupt tasks can also be specified and executed for high-speed counter interrupts and
\nexecuted.)<\/td>\n<\/tr>\n
Maximum subroutine
\nnumber<\/strong><\/th>\n		256<\/td>\n<\/tr>\n
Maximum jump number<\/strong><\/th>\n256<\/td>\n<\/tr>\n
I\/O
\nareas<\/strong><\/th>\n		Input Area<\/strong><\/th>\n1,600 bits (100 words) CIO 0 to CIO 99<\/td>\n<\/tr>\n
<\/td>\nBuilt-in
\nInput Area<\/strong><\/th>\n		36 bits: CIO
\n0.00 to CIO
\n0.11 and CIO
\n1.00 to CIO
\n1.11 and CIO
\n2.00 to CIO
\n2.11<\/td>\n		24 bits: CIO
\n0.00 to CIO
\n0.11 and CIO
\n1.00 to CIO
\n1.11<\/td>\n		18 bits: CIO
\n0.00 to CIO
\n0.11 and CIO
\n1.00 to CIO
\n1.05<\/td>\n		12 bits: CIO
\n0.00 to CIO
\n0.11<\/td>\n		8 bits: CIO
\n0.00 to CIO
\n0.07<\/td>\n		6 bits: CIO
\n0.00 to CIO
\n0.05<\/td>\n<\/tr>\n
Output Area<\/strong><\/th>\n1,600 bits (100 words) CIO 100 to CIO 199<\/td>\n<\/tr>\n
<\/td>\nBuilt-in
\nOutput
\nArea<\/strong><\/th>\n		24 bits: CIO
\n100.00 to CIO
\n100.07 and
\nCIO 101.00 to
\nCIO 101.07
\nand CIO
\n102.00 to CIO
\n102.07<\/td>\n		16 bits: CIO
\n100.00 to CIO
\n100.07 and
\nCIO 101.00 to
\nCIO 101.07<\/td>\n		12 bits: CIO
\n100.00 to CIO
\n100.07 and
\nCIO 101.00 to
\nCIO 100.03<\/td>\n		8 bits: CIO
\n100.00 to
\nCIO 100.07<\/td>\n		6 bits: CIO
\n100.00 to
\nCIO 100.05<\/td>\n		4 bits: CIO
\n100.00 to
\nCIO 100.03<\/td>\n<\/tr>\n
1:1 Link
\nArea<\/strong><\/th>\n		1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063)<\/td>\n<\/tr>\n
Serial PLC
\nLink Area<\/strong><\/th>\n		1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)<\/td>\n<\/tr>\n
Work bits<\/strong><\/th>\n8,192 bits (512 words): W000.00 to W511.15 (W0 to W511)
\nCIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143)<\/td>\n<\/tr>\n
TR Area<\/strong><\/th>\n16 bits: TR0 to TR15<\/td>\n<\/tr>\n
Holding Area<\/strong><\/th>\n8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)<\/td>\n<\/tr>\n
AR Area<\/strong><\/th>\nRead-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447)
\nRead\/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)<\/td>\n<\/tr>\n
Timers<\/strong><\/th>\n4,096 timer numbers: T0 to T4095<\/td>\n<\/tr>\n
Counters<\/strong><\/th>\n4,096 counter numbers: C0 to C4095<\/td>\n<\/tr>\n
DM Area<\/strong><\/th>\n32 Kwords: D0 to D32767<\/td>\n10 Kwords: D0 to D9999, D32000 to
\nD32767<\/td>\n<\/tr>\n
Data Register Area<\/strong><\/th>\n16 registers (16 bits): DR0 to DR15<\/td>\n<\/tr>\n
Index Register Area<\/strong><\/th>\n16 registers (32 bits): IR0 to IR15<\/td>\n<\/tr>\n
Task Flag Area<\/strong><\/th>\n32 flags (32 bits): TK0000 to TK0031<\/td>\n<\/tr>\n
Trace Memory<\/strong><\/th>\n4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)<\/td>\n<\/tr>\n
Memory Cassette<\/strong><\/th>\nA special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program
\nbackups and auto-booting.<\/td>\n<\/tr>\n
Clock function<\/strong><\/th>\nSupported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55\u00b0C),
\n-2.0 min to +2.0 min (ambient temperature: 25\u00b0C),
\n-2.5 min to +1.5 min (ambient temperature: 0\u00b0C)<\/td>\n<\/tr>\n
Communications
\nfunctions<\/strong><\/th>\n		One built-in peripheral port (USB 1.1): For connecting Support Software only.<\/td>\n<\/tr>\n
A maximum of two Serial Communications
\nOption Boards can be mounted.<\/td>\n		A maximum of one Serial
\nCommunications Option
\nBoard can be mounted.<\/td>\n		Not
\nsupported.<\/td>\n<\/tr>\n
A maximum of two Ethernet Option Board
\ncan be mounted.
\nWhen using CP1W-CIF41 Ver.1.0, one
\nEthernet Option Board can be mounted.<\/td>\n		A maximum of one
\nEthernet Option Board
\ncan be mounted.<\/td>\n		Not
\nsupported.<\/td>\n<\/tr>\n
Memory backup<\/strong><\/th>\nFlash memory: User programs, parameters (such as the PLC Setup), comment data, and the
\nentire DM Area can be saved to flash memory as initial values.
\nBattery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a
\nbattery.<\/td>\n<\/tr>\n
Battery service life<\/strong><\/th>\nService life expectancy is 5 years at 25\u00b0C, less at higher temperatures. (From 0.75 to 5 years
\ndepending on model, power supply rate, and ambient temperature.)<\/td>\n<\/tr>\n
Built-in input
\nterminals<\/strong><\/th>\n		60 (36
\ninputs,
\n24 outputs)<\/td>\n		40 (24
\ninputs,
\n16 outputs)<\/td>\n		30 (18
\ninputs,
\n12 outputs)<\/td>\n		20 (12
\ninputs,
\n8 outputs)<\/td>\n		14 (8
\ninputs,
\n6 outputs)<\/td>\n		10 (6
\ninputs,
\n4 outputs)<\/td>\n<\/tr>\n
Number of
\nconnectable
\nExpansion Units and
\nExpansion I\/O Units<\/strong><\/th>\n		CP-series Expansion Unit and Expansion
\nI\/O Units: 3 max.<\/td>\n		CP-series Expansion Units
\nand Expansion I\/O Units: 1 max.<\/td>\n		Not
\nsupported.<\/td>\n<\/tr>\n
Max. number of I\/O
\npoints<\/strong><\/th>\n		180 (60 built
\nin + 40 per
\nExpansion
\n(I\/O) Unit
\n\u00d7 3 Units)<\/td>\n		160 (40 built
\nin + 40 per
\nExpansion
\n(I\/O) Unit
\n\u00d7 3 Units)<\/td>\n		150 (30 built
\nin + 40 per
\nExpansion
\n(I\/O) Unit
\n\u00d7 3 Units)<\/td>\n		60 (20 built
\nin + 40 per
\nExpansion
\n(I\/O) Unit
\n\u00d7 1 Unit)<\/td>\n		54 (14 built
\nin + 40 per
\nExpansion
\n(I\/O) Unit
\n\u00d7 1 Unit)<\/td>\n		10 (10 built
\nin)<\/td>\n<\/tr>\n
Interrupt inputs<\/strong><\/th>\n6 inputs (Response time: 0.3 ms)<\/td>\n4 inputs
\n(Response
\ntime: 0.3 ms)<\/td>\n		2 inputs
\n(Response
\ntime: 0.3 ms)<\/td>\n<\/tr>\n
Interrupt inputs
\ncounter mode<\/strong><\/th>\n		6 inputs (Response frequency: 5 kHz max. for all interrupt
\ninputs), 16 bits
\nUp or down counters<\/td>\n		4 inputs
\n(Response
\nfrequency:
\n5 kHz max.
\nfor all
\ninterrupt
\ninputs), 16
\nbits Up or
\ndown
\ncounters<\/td>\n		2 inputs
\n(Response
\nfrequency:
\n5 kHz max.
\nfor all
\ninterrupt
\ninputs), 16
\nbits Up or
\ndown
\ncounters<\/td>\n<\/tr>\n
Quick-response inputs<\/strong><\/th>\n6 points (Min. input pulse width: 50 \u03bcs max.)<\/td>\n4 points (Min.
\ninput pulse
\nwidth: 50 \u03bcs
\nmax.)<\/td>\n		2 points (Min.
\ninput pulse
\nwidth: 50 \u03bcs
\nmax.)<\/td>\n<\/tr>\n
Scheduled interrupts<\/strong><\/th>\n1<\/td>\n<\/tr>\n
High-speed counters<\/strong><\/th>\n4 inputs\/2 axes (24 VDC):
\nDifferential phases (4x), 50 kHz
\nSingle-phase (pulse plus direction, up\/down, increment), 100 kHz
\nValue range: 32 bits, Linear mode or ring mode
\nInterrupts: Target value comparison or range comparison<\/td>\n<\/tr>\n
Pulse
\noutputs
\n(models
\nwith
\ntransistor
\noutputs
\nonly)<\/strong><\/th>\n		Pulse
\noutputs<\/strong><\/th>\n		Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed)
\n2 outputs, 1 Hz to 100 kHz (CCW\/CW or pulse plus direction)<\/td>\n<\/tr>\n
PWM
\noutputs<\/strong><\/th>\n		Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%)
\n2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: +1%\/0% at 0.1 Hz to 10,000 Hz and
\n+5%\/0% at 10,000 Hz to 32,800 Hz)<\/td>\n<\/tr>\n
Analog control<\/strong><\/th>\n1 (Setting range: 0 to 255)<\/td>\n<\/tr>\n
Analog input<\/strong><\/th>\n1 input (Resolution: 1\/256, Input range: 0 to 10 V). Not isolated.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

CPU Units<\/h4>\n

CP1L-EM CPU Units with 40 Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L-EM CPU Units with 30 Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L-EL CPU Units with 20 Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L CPU Units with 60 I\/O Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L CPU Units with 40 I\/O Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L CPU Units with 30 I\/O Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L CPU Units with 14 or 20 I\/O Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1L CPU Units with 10 I\/O Points<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

Expansion Units and Expansion I\/O Units<\/h4>\n

CP1W-20ED[][], CP1W-16[][],
\nCP1W-AD04[], CP1W-DA021\/04[],
\nCP1W-MAD[][], CP1W-TS[][]1\/[][]2\/[][]3<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1W-8E[][]
\nCP1W-SRT21<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n

CP1W-40ED[]
\nCP1W-32E[][]
\nCP1W-TS004<\/h4>\n
\n
\"CP1L<\/div>\n<\/div>\n
\n
\"CP1L<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n\n\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0CP1L Data Sheet<\/a><\/td>\nP081-E1-03
\n[3487KB]<\/span><\/td>\n		Dec 03, 2018<\/td>\n<\/tr>\n
\"\"\u00a0CP1 Catalog<\/a><\/td>\nP082-E1-05
\n[5577KB]<\/span><\/td>\n		Jan 05, 2018<\/td>\n<\/tr>\n
\"\"\u00a0New Functions Added to CS\/CJ\/CP Series Catalog<\/a><\/td>\nP097-E1-01
\n[1267KB]<\/span><\/td>\n		Sep 28, 2015<\/td>\n<\/tr>\n
\"\"\u00a0FA Controller Catalog<\/a><\/td>\nP090-E1-07
\n[18214KB]<\/span><\/td>\n		Aug 20, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

High Performing Programmable Controller with Embedded Ethernet<\/h2>\n","protected":false},"featured_media":1461,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[93,63,72],"product_tag":[],"_links":{"self":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product\/1462"}],"collection":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/comments?post=1462"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media\/1461"}],"wp:attachment":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media?parent=1462"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1462"},{"taxonomy":"product_tag","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1462"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}