{"id":1394,"date":"2019-01-02T03:00:28","date_gmt":"2019-01-02T03:00:28","guid":{"rendered":"http:\/\/store.al-tet.com\/?post_type=product&p=1394"},"modified":"2019-01-02T03:00:28","modified_gmt":"2019-01-02T03:00:28","slug":"nx-ilm400-2","status":"publish","type":"product","link":"http:\/\/store.al-tet.com\/index.php\/product\/nx-ilm400-2\/","title":{"rendered":"NX-ILM400"},"content":{"rendered":"
\n
\n

Downtime can be reduced.<\/strong><\/p>\n

Notifies you of faulty parts and such phenomena in the Sensor in real time.<\/p>\n<\/div>\n<\/div>\n

\n
\n

The frequency of sudden failure can be decreased.<\/strong><\/p>\n

Condition monitoring of sensors and equipment to prevent troubles.<\/p>\n<\/div>\n<\/div>\n

\n
\n

The efficiency of changeover can be improved.<\/strong><\/p>\n

The batch check for individual sensor IDs significantly decreases commissioning time.<\/p>\n<\/div>\n<\/div>\n

[To those in charge of maintenance \u201cCondition monitoring\u201d for predictive maintenance (1)] Reduction of Sudden Stops by Grasping the Flow Rate Simultaneously with the Temperature of Cooling Water and Hydraulic Oil Circulating in Equipment<\/h4>\n
\n
\"NX-ILM400<\/div>\n<\/div>\n

Existing problems<\/h4>\n
\n
\n

While the presence or absence of cooling water is checked by means of the ON\/OFF-based pressure sensor, it is unable to detect any drop in the flow rate of the cooling water or any rise in the cooling water temperature. For that reason,<\/p>\n

\u2219 The transformer is not cooled, and gets overheated, potentially leading to sudden stops of the equipment and the entire line.<\/p>\n

\u2219 The tip may be deformed, causing defective products.<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

With an IO-Link IoT Flow Sensor<\/h4>\n

The flow rate and simultaneously the temperature of the circulation system are measured, substantially reducing sudden error.<\/h4>\n
\n
\n

Simultaneous monitoring of the flow rate and temperature changes, and informing of those changes, enable you to carry out predictive maintenance and reduce defective products.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

[To those in charge of maintenance \u201cCondition monitoring\u201d for predictive maintenance (2)] The Proximity Sensor Indicates an Excessive Proximity to the Sensing Object. Understand the Changes in Equipment Condition in Advance and Reduce Sudden Stops<\/h4>\n
\n
\"NX-ILM400<\/div>\n<\/div>\n

Existing problems<\/h4>\n
\n
\n

The detection position changes due to wear and vibration in the equipment\u2019s mechanical parts and as a result, false detection and collision with the sensor have a negative impact on the equipment…<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

With an IO-Link Proximity Sensor<\/h4>\n

You are notified of excessive remoteness or proximity, and the occurrence of sudden defects is greatly reduced<\/h4>\n
\n
\n

Constantly monitoring the position of the sensing object and notifying of excessive remoteness or proximity can be used for predictive maintenance of the equipment.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

[To those in charge of maintenance \u201cCondition monitoring\u201d for predictive maintenance (3)] Understand Unstable Situations in the Incident Level of the Photoelectric Sensor in Advance and Reduce Sudden Stops<\/h4>\n
\n
\"NX-ILM400<\/div>\n<\/div>\n

Existing problems<\/h4>\n
\n
\n

\u2219 In a conveyance process operating for 24 hours, dust or dirt accumulated on the detection surface of the photoelectric sensor, leading to a decline in the light incident level that causes the sensor to make false detection and the equipment to stop…<\/p>\n

\u2219 Water drops stick to the sensing surface of the reflective sensor causing reflected light to enter…<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

With an IO-Link Photoelectric Sensor<\/h4>\n

A light incident level monitor prevents false detection<\/h4>\n
\n
\n

With a response time of 1 ms, Photoelectric Sensor\u2019s light incident level is output for monitoring. It is output when the light incident level exceeds the instability detection threshold, so you can check the site before false detection occurs and perform predictive maintenance.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

[To those in charge of maintenance \u201cAbnormality detection\u201d for the shortest recovery] Detects Wiring Cable Disconnections and Errors and Improves Equipment Operation Rate Through Quick Maintenance<\/h4>\n
\n
\"NX-ILM400<\/div>\n<\/div>\n

Existing problems<\/h4>\n
\n
\n

\u2219 An abnormality was displayed on the abnormality display screen, but upon going to look at the equipment, no external error was detected and the cause of the stop was not understood…<\/p>\n

\u2219 Those responsible for maintenance investigated the cause of the abnormality from the activity of the stopped equipment, but because the maintenance person relied on the skill he or she has to identify the abnormality and replace the failed sensor, stoppages from 2 hours to several days occur…<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

With an IO-Link Sensor<\/h4>\n

Abnormal area and phenomenon of sensors are reported in real time<\/h4>\n
\n
\n

When an abnormality occurs in a sensor, because you can see where the abnormality occurred and the factors estimated for it, you can go to where the abnormality occurred and recover the equipment in the shortest amount of time.
\nAlso with wire disconnection detection, not only output wires, but also power lines can be detected unconditionally.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

Easy replacement of IO-Link sensors with Non-IO-Link sensors<\/h4>\n
\n
\n

You need a quick recovery but you have only Non-IO-Link sensors with no IO-Link sensors in stock. You probably think in such a case, the control program needs modifications, and requires additional time for the recovery.
\nWith IO-Link Master, since the IO-Link ON\/OFF data and the data for Non-IO-Link sensors are located in the same memory, replacement with Non-IO-Link sensors can be carried out without any modification of the control program, resulting in a reduction of the equipment downtime.<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

[To those in charge of production engineering \u201cIndividual identification\u201d for the reduction of man-hours] Improving System Commissioning and Changeover Efficiency by Checking Identifications in Batches<\/h4>\n
\n
\"NX-ILM400<\/div>\n<\/div>\n

Existing problems<\/h4>\n
\n
\n

\u2219 During system start-up or changeover, operators had to perform the I\/O check for each of the thousands of sensors installed on the line, and it took an enormous amount of time…<\/p>\n

\u2219 When a sensor is installed wrong or an error occurs, wasteful work occurred that would normally be unnecessary…<\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n

With an IO-Link Sensor<\/h4>\n

Without going to the site, you can check individual sensor identifications in batches, resulting in a sharp reduction of commissioning time<\/h4>\n
\n
\n

By checking the sensor identification (manufacturer\/sensor type\/model number), you can easily check mistakes such as misconnected or unconnected sensors and installation mistakes.
\nAlso, because it is possible to program multiple sensors at once using the command language used only for the controller, it is also possible to reduce commissioning time sharply.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n

[Omron\u2019s IO-Link Compliant Equipment] Masters and Sensors Can Be Chosen to Match Your Situation<\/h4>\n
\n
\n

For the connection of IO-Link Sensors and IO-Link Masters, two types are available: a screw-less clamp terminal block and an M12 connector.
\nIn addition, NX-ILM400 IO-Link Master with screw-less clamp terminal block is connectable not only to EtherCAT, but also to EtherNet\/IP communication coupler units, and you can choose between them according to the system configuration.<\/p>\n<\/div>\n

\"NX-ILM400<\/a><\/p>\n
Please click image to enlarge (open in a new window).<\/a><\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n

International Standards<\/h4>\n
\n
\n

\u2022 The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, CE: EU Directives, RCM: Regulatory Compliance Mark, and KC: KC Registration.<\/p>\n

\u2022 Contact your OMRON representative for further details and applicable conditions for these standards.<\/p>\n<\/div>\n<\/div>\n

NX-series IO-Link Master Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Number of
\nIO-Link ports<\/strong><\/th>\n		I\/O refreshing
\nmethod<\/strong><\/th>\n		I\/O connection
\nterminals<\/strong><\/th>\n<\/tr>\n
NX-series IO-Link Master Unit<\/td>\n4<\/td>\nFree-Run refreshing<\/td>\nScrewless clamping
\nterminal block<\/td>\n		NX-ILM400<\/strong><\/td>\nUC1, CE, N,
\nRCM, KC<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Peripheral Devices<\/h4>\n

Sensor I\/O Connectors<\/h4>\n
\n
\n

Order a cable with a connector on one end to connect a sensor of connector type. Refer to the Ordering Information in the catalog of the sensor to connect or the Sensor I\/O Connectors\/Sensor Controllers on your local OMRON website for recommended products.<\/p>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nPins for 10 Units
\n(30 terminal block pins and 30 Unit pins)<\/td>\n		NX-AUX02<\/strong><\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\nStandards<\/strong><\/th>\n<\/tr>\n
No. of
\nterminals<\/strong><\/th>\n		Terminal number
\nindications<\/strong><\/th>\n		Ground terminal
\nmark<\/strong><\/th>\n		Terminal current
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/td>\n16<\/td>\nA\/B<\/td>\nNot provided<\/td>\n10 A<\/td>\nNX-TBA162<\/strong><\/td>\n—<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Software<\/h4>\n

Automation Software Sysmac Studio<\/h4>\n
\n
\n

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\nStand-
\nards<\/strong><\/th>\n<\/tr>\n
<\/th>\nNumber of
\nlicenses<\/strong><\/th>\n		Media<\/strong><\/th>\n<\/tr>\n
Sysmac
\nStudio
\nStandard
\nEdition
\nVer.1.[][]<\/strong><\/th>\n		The Sysmac Studio is the software that provides an
\nintegrated environment for setting, programming,
\ndebugging and maintenance of machine automation
\ncontrollers including the NJ\/NX-series CPU Units,
\nNY-series Industrial PC, EtherCAT Slave, and the HMI.<\/p>\n

Sysmac Studio runs on the following OS.
\nWindows 7 (32-bit\/64-bit version)\/Windows 8 (32-bit\/
\n64-bit version)\/Windows 8.1 (32-bit\/64-bit version)\/
\nWindows 10 (32-bit\/64-bit version)<\/p>\n

The Sysmac Studio Standard Edition DVD includes CX-
\nConfiguratorFDT to set up IO-Link Master Units and
\nIO-Link devices.
\nRefer to your OMRON website for details.<\/td>\n

—
\n(Media only)<\/td>\n		DVD<\/td>\nSYSMAC-SE200D<\/strong><\/td>\n—<\/td>\n<\/tr>\n
1 license *<\/td>\n—<\/td>\nSYSMAC-SE201L<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).<\/p>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMust be built into a panel.<\/td>\n<\/tr>\n
Grounding methods<\/strong><\/th>\nGround to 100 \u03a9 or less.<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\nPollution degree 2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\nConforms to IEC 61000-4-4, 2 kV (power line).<\/td>\n<\/tr>\n
Overvoltage
\ncategory<\/strong><\/th>\n		Category: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with amplitude of 3.5 mm,
\n8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>
\n100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions<\/td>\n<\/tr>\n
Applicable standards *<\/strong><\/th>\nUL 61010-2-201, ANSI\/ISA 12.12.01, EU: EN 61131-2, NK, LR, RCM, KC,
\nand IO-Link conformance<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Unit Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Unit name<\/strong><\/th>\nIO-Link Master Unit<\/td>\n<\/tr>\n
Model<\/strong><\/th>\nNX-ILM400<\/td>\n<\/tr>\n
Number of ports<\/strong><\/th>\n4<\/td>\n<\/tr>\n
Communications
\nspecifications<\/strong><\/th>\n		Communications protocol<\/strong><\/th>\nIO-Link protocol<\/td>\n<\/tr>\n
Baud rate<\/strong><\/th>\nCOM1: 4.8kbps
\nCOM2: 38.4kbps
\nCOM3: 230.4kbps<\/td>\n<\/tr>\n
Topology<\/strong><\/th>\n1:1<\/td>\n<\/tr>\n
Compliant standards<\/strong><\/th>\n\u2022 IO-Link Interface and System Specification Version1.1.2
\n\u2022 IO-Link Test Specification Version1.1.2<\/td>\n<\/tr>\n
Power supply to
\ndevices* in
\nIO-Link Mode or
\nSIO (DI) Mode<\/strong><\/th>\n		Rated voltage<\/strong><\/th>\n24 VDC (20.4 to 28.8 VDC)<\/td>\n<\/tr>\n
Maximum load current<\/strong><\/th>\n0.2 A\/port<\/td>\n<\/tr>\n
Short-circuit protection<\/strong><\/th>\nProvided.<\/td>\n<\/tr>\n
Digital inputs
\n(in SIO (DI)
\nMode)<\/strong><\/th>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC (20.4 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n5 mA typical (24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min., 2 mA min.<\/td>\n<\/tr>\n
OFF voltage<\/strong><\/th>\n5 VDC max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms (default), 2 ms, 4 ms, 8 ms, 16 ms,
\n32 ms, 64 ms,128 ms, 256 ms<\/td>\n<\/tr>\n
Digital outputs
\n(in SIO (DO)
\nMode)<\/strong><\/th>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Output type<\/strong><\/th>\nPush-pull<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC (20.4 to 28.8 VDC)<\/td>\n<\/tr>\n
Maximum load current<\/strong><\/th>\n0.1 A\/port<\/td>\n<\/tr>\n
Short-circuit protection<\/strong><\/th>\nProvided.<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
Digital inputs
\nfor pin 2
\n(in IO-Link
\nMode)<\/strong><\/th>\n		Internal I\/O common<\/strong><\/th>\nPNP<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC (20.4 to 28.8 VDC)<\/td>\n<\/tr>\n
Input current<\/strong><\/th>\n2 mA typical (24 VDC)<\/td>\n<\/tr>\n
ON voltage\/ON current<\/strong><\/th>\n15 VDC min., 2 mA min.<\/td>\n<\/tr>\n
OFF voltage<\/strong><\/th>\n5 VDC max.<\/td>\n<\/tr>\n
Input filter time<\/strong><\/th>\nNo filter, 0.25 ms, 0.5 ms, 1 ms (default), 2 ms, 4 ms, 8 ms, 16 ms,
\n32 ms, 64 ms, 128ms, 256 ms<\/td>\n<\/tr>\n
Cable
\nspecifications<\/strong><\/th>\n		Cable type<\/strong><\/th>\nUnshielded<\/td>\n<\/tr>\n
Length<\/strong><\/th>\n20 m max.<\/td>\n<\/tr>\n
Electrostatic capacity
\nbetween lines<\/strong><\/th>\n		3 nF max.<\/td>\n<\/tr>\n
Loop resistance<\/strong><\/th>\n6 \u03a9 max.<\/td>\n<\/tr>\n
External connection terminals<\/strong><\/th>\nScrewless Clamping Terminal Block (16 terminals)<\/td>\n<\/tr>\n
I\/O refreshing method<\/strong><\/th>\nFree-Run refreshing<\/td>\n<\/tr>\n
Dimensions<\/strong><\/th>\n12 \u00d7 100 \u00d7 71 mm (W \u00d7 H \u00d7 D)<\/td>\n<\/tr>\n
Isolation method<\/strong><\/th>\nPhotocoupler isolation<\/td>\n<\/tr>\n
Insulation resistance<\/strong><\/th>\n20 M\u03a9 min. at 100 VDC (between isolated circuits)<\/td>\n<\/tr>\n
Dielectric strength<\/strong><\/th>\n510 VAC for 1 min, leakage current: 5 mA max. (between isolated
\ncircuits)<\/td>\n<\/tr>\n
I\/O power supply method<\/strong><\/th>\nSupply from the NX bus<\/td>\n<\/tr>\n
NX Unit power consumption<\/strong><\/th>\n\u2022 Connected to a CPU Unit
\n1.05 W max.
\n\u2022 Connected to a Communications Coupler Unit
\n0.80 W max.<\/td>\n<\/tr>\n
Current consumption from I\/O power supply<\/strong><\/th>\n50 mA<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n67 g<\/td>\n<\/tr>\n
Circuit configuration<\/strong><\/th>\n\"3540_sp_2_1\"<\/td>\n<\/tr>\n
Terminal connection diagram<\/strong><\/th>\n\"3540_sp_2_2\"<\/td>\n<\/tr>\n
Installation orientation and restrictions<\/strong><\/th>\n\"3540_sp_2_3\"<\/td>\n<\/tr>\n
Protective functions<\/strong><\/th>\nL+ terminal short-circuit protection
\nC\/Q terminal short-circuit protection<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Function Specifications<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Function<\/strong><\/th>\nDescription<\/strong><\/th>\n<\/tr>\n
Communications<\/strong><\/th>\nCyclic
\ncommunications<\/strong><\/th>\n		I\/O data (process data) in the IO-Link devices is cyclically exchanged with the IO-Link Master Unit as the IO-Link communications master.
\nAt the same time, this data and the status of the IO-Link Master Unit is cyclically exchanged with the controller, with the IO-Link Master Unit operating as a slave of the controller.
\nCyclic communications can be used to check the amount of detection performance deterioration in devices, and to check changes in usage conditions, such as the amount of incident light for photoelectric sensors, stability detection margins, and excessive proximity for proximity sensors.<\/td>\n<\/tr>\n
Message
\ncommunications<\/strong><\/th>\n		The controller can send messages (commands) to the IO-Link Master Unit and receive the response from the IO-Link Master Unit.
\nThe IO-Link Master Unit can also function as a gateway to send messages (commands and responses) between the controller and the IO-Link devices.
\nDuring operation, you can change and adjust device parameters, such as threshold settings, tuning execution, and ON-delay time changes, from a program.
\nOr, during operation, you can check the internal status, such as the operating times of devices.<\/td>\n<\/tr>\n
Communications mode settings<\/strong><\/th>\nYou can select any of the following modes for each port:
\nIO-Link Mode, SIO (DI) Mode, SIO (DO) Mode, and Disable Port
\nThis allows you to combine IO-Link communications and digital I\/O in a single unit.<\/td>\n<\/tr>\n
Digital inputs for pin 2<\/strong><\/th>\nIn IO-Link Mode, you can perform digital input with pin 2 while performing IO-Link communications.<\/td>\n<\/tr>\n
Automatic baud rate setting for
\nIO-Link communications<\/strong><\/th>\n		The IO-Link Master Unit automatically matches the specific baud rates (COM1, COM2, or COM3) of the IO-Link devices to communicate with the IO-Link devices.
\nTherefore, it is not necessary to set the baud rate of the connected device for each port.<\/td>\n<\/tr>\n
Connected device verification<\/strong><\/th>\nThis function is used to verify the configuration of IO-Link devices that are connected to the IO-Link Master Unit against the registered IO-Link device configuration settings when the power supply is turned ON.
\nThe user can enable or disable connected device verification.<\/td>\n<\/tr>\n
IO-Link communications error
\ndetection<\/strong><\/th>\n		This function detects I\/O cable breaks, disconnections from IO-Link device ports, error-level device events, device configuration verification errors, and IO-Link device malfunctions.<\/td>\n<\/tr>\n
Detection of short-circuits in I\/O
\ncables<\/strong><\/th>\n		This function detects short-circuits in I\/O cables<\/td>\n<\/tr>\n
Notification of input data validity<\/strong><\/th>\nThe controller can use the Input Data Enabled Flags to determine whether the process input data for IO-Link communications is valid.<\/td>\n<\/tr>\n
Load rejection for controller
\ncommunications error<\/strong><\/th>\n		This function turns OFF outputs from the IO-Link Master Unit when a communications error occurs in communications with the controller in IO-Link Mode or in an SIO mode.
\nThis prevents incorrect output operations when communications error occurs.<\/td>\n<\/tr>\n
IO-Link total communications lost
\nframes<\/strong><\/th>\n		The IO-Link total communications lost frames can be read from the CX-ConfiguratorFDT.
\nYou can use this function to determine communications status as affected by I\/O cable noise or other factors.<\/td>\n<\/tr>\n
Digital input filter<\/strong><\/th>\nThis function is used to eliminate chattering and noise of the input signal for digital inputs in SIO(DI) Mode or for digital inputs for pin 2 in IO-Link Mode. It prevents data change and stabilizes the input signal even in situations where the input data changes due to chattering or noise and the bit status is unstable.<\/td>\n<\/tr>\n
Digital input collection*<\/strong><\/th>\nIn IO-Link Mode, this function reflects the specified bit data in the input data from the IO-Link device on the digital input data of the IO-Link Master Unit. As a result, the bit data in the input data from the IO-Link device can be aggregated into the digital input data of the IO-Link Master Unit. One bit for each IO-Link port can be aggregated. This function cannot be used in SIO (DI) Mode and SIO (DO) Mode.
\nIf you use this function, digital inputs with pin 2 cannot be used.<\/td>\n<\/tr>\n
Backup and restoration of
\nparameter settings in IO-Link
\ndevices<\/strong><\/th>\n		This function is used to back up parameter settings in IO-Link devices in the IO-Link Master Unit or restore them to IO-Link devices.
\nThis eliminates the need to set parameters again after replacing an IO-Link device.<\/td>\n<\/tr>\n
Event log<\/strong><\/th>\nThis function records events, such as errors and status changes, that occur in the IO-Link Master Unit and the IO-Link devices.
\nThis enables partial troubleshooting for NJ\/NX-series Controllers and NY-series Industrial PCs.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* This function is supported with the unit version 1.1 or later.<\/p>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connecting with CPU Units<\/h4>\n
\n
\n

Refer to the user’s manual for the CPU Unit for the CPU Unit to which NX Units can be connected<\/p>\n<\/div>\n<\/div>\n

\n
\n
\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding versions *<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\nCX-ConfiguratorFDT<\/strong><\/th>\n<\/tr>\n
NX-ILM400<\/td>\nVer.1.1<\/td>\nVer1.13 or later<\/td>\nVer1.20 or higher<\/td>\nVer2.3 or higher<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.13 or later<\/td>\nVer.1.17 or higher<\/td>\nVer.2.3 or higher<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

Connecting with Coupler Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding versions *<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		EtherCAT<\/strong><\/th>\nEtherNet\/IP<\/strong><\/th>\n<\/tr>\n
Communi-
\ncations
\nCoupler
\nUnit<\/strong><\/th>\n		NJ\/NX-
\nseries
\nCPU Units
\nor
\nNY-series
\nIndustrial
\nPCs<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		CX-
\nConfigurator
\nFDT<\/strong><\/th>\n		Communi-
\ncations
\nCoupler
\nUnit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		CX-
\nConfigurator
\nFDT<\/strong><\/th>\n<\/tr>\n
NX-ILM400<\/td>\nVer.1.1<\/td>\nVer.1.0
\nor later<\/td>\n		Ver.1.12
\nor later<\/td>\n		Ver.1.20
\nor higher<\/td>\n		Ver.2.2
\nor higher<\/td>\n		Ver.1.0
\nor later<\/td>\n		Ver.1.20
\nor higher<\/td>\n		Ver.2.2
\nor higher<\/td>\n<\/tr>\n
Ver.1.0<\/td>\nVer.1.0
\nor later<\/td>\n		Ver.1.12
\nor later<\/td>\n		Ver.1.16
\nor higher<\/td>\n		Ver.2.2
\nor higher<\/td>\n		Ver.1.0
\nor later<\/td>\n		Ver.1.16
\nor higher<\/td>\n		Ver.2.2
\nor higher<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

\n
\n

NX-ILM400
\n12 mm Width<\/strong><\/p>\n<\/div>\n

\"NX-ILM400<\/div>\n<\/div>\n
<\/div>\n
<\/div>\n
\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0IO-Link Series Catalog<\/a><\/td>\nY229-E1-02
\n[28505KB]<\/span><\/td>\n		Jul 17, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

IO-Link makes sensor level information visible and solves the three major issues at manufacturing sites! The screwless clamping terminal block reduces wiring work.<\/h2>\n","protected":false},"featured_media":1395,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63,72],"product_tag":[],"_links":{"self":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product\/1394"}],"collection":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/comments?post=1394"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media\/1395"}],"wp:attachment":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media?parent=1394"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1394"},{"taxonomy":"product_tag","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1394"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}