{"id":1385,"date":"2019-01-02T02:31:50","date_gmt":"2019-01-02T02:31:50","guid":{"rendered":"http:\/\/store.al-tet.com\/?post_type=product&p=1385"},"modified":"2019-01-02T02:31:51","modified_gmt":"2019-01-02T02:31:51","slug":"nx-hb-2","status":"publish","type":"product","link":"http:\/\/store.al-tet.com\/index.php\/product\/nx-hb-2\/","title":{"rendered":"NX-HB"},"content":{"rendered":"
\n
\n

\u2022 Up to four CT inputs per unit<\/p>\n

\u2022 Omron’s proven heater burnout detection function<\/p>\n

\u2022 Monitoring of CT currents to detect heater burnouts and SSR failures<\/p>\n

\u2022 Time-proportional control outputs to drive SSRs<\/p>\n

\u2022 Control outputs not affected by controller cycle time<\/p>\n

\u2022 Four control outputs to drive SSRs (100 mA max.)<\/p>\n

\u2022 Heater burnout detection for a single-phase or three-phase heater<\/p>\n

\u2022 Detachable front connector with screwless Push-In Plus terminals for easy installation and maintenance<\/p>\n

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
\nEtherCAT\u00ae<\/sup>\u00a0is a registered trademark of Beckhoff Automation GmbH for their patented technology.
\nEtherNet\/IPTM<\/sup>\u00a0is the trademarks of ODVA.
\nOther company names and product names in this document are the trademarks or registered trademarks of their respective companies.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

Applicable standards<\/h4>\n
\n
\n

Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Heater Burnout Detection Unit<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
Product
\nname<\/strong><\/th>\n		Specification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
CT input section<\/strong><\/th>\nControl output section<\/strong><\/th>\n<\/tr>\n
Number
\nof
\ninputs<\/strong><\/th>\n		Maximum
\nheater
\ncurrent<\/strong><\/th>\n		Number
\nof
\noutputs<\/strong><\/th>\n		Internal
\nI\/O
\ncommon<\/strong><\/th>\n		Maximum
\nload
\ncurrent<\/strong><\/th>\n		Rated
\nvoltage<\/strong><\/th>\n		I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n<\/tr>\n
Heater
\nBurnout
\nDetection
\nUnit
\n\"3539_lu_1_1\"<\/strong><\/th>\n		4<\/td>\n50 A AC<\/td>\n4<\/td>\nNPN<\/td>\n0.1 A\/point,
\n0.4 A\/Unit<\/td>\n		12 to
\n24 VDC<\/td>\n		Free-Run
\nrefreshing<\/td>\n		NX-HB3101<\/strong><\/td>\n<\/tr>\n
PNP<\/td>\n24 VDC<\/td>\nNX-HB3201<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Optional Products<\/h4>\n
\n
\n
\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Unit\/Terminal Block Coding Pins<\/strong><\/th>\nPins for 10 Units (30 terminal block pins and 30 Unit pins)<\/td>\nNX-AUX02<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
No. of
\nterminals<\/strong><\/th>\n		Terminal
\nnumber
\nindications<\/strong><\/th>\n		Ground
\nterminal
\nmark<\/strong><\/th>\n		Terminal
\ncurrent
\ncapacity<\/strong><\/th>\n<\/tr>\n
Terminal Block<\/strong><\/th>\n16<\/td>\nA\/B<\/td>\nNot provided<\/td>\n10 A<\/td>\nNX-TBA162<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n\n\n\n\n\n
Product name<\/strong><\/th>\nSpecification<\/strong><\/th>\nModel<\/strong><\/th>\n<\/tr>\n
Current Transformer (CT) *<\/strong><\/th>\nHole diameter: 5.8 mm<\/td>\nE54-CT1<\/strong><\/td>\n<\/tr>\n
Hole diameter: 12.0 mm<\/td>\nE54-CT3<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Can be connected to the NX-HB Heater Burnout Detection Unit.<\/p>\n<\/div>\n<\/div>\n

Accessories<\/h4>\n
\n
\n

Not included.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

General Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/th>\nSpecification<\/strong><\/th>\n<\/tr>\n
Enclosure<\/strong><\/th>\nMounted in a panel<\/td>\n<\/tr>\n
Grounding method<\/strong><\/th>\nGround to 100 \u03a9 or less<\/td>\n<\/tr>\n
Operating
\nenvironment<\/strong><\/th>\n		Ambient operating
\ntemperature<\/strong><\/th>\n		0 to 55\u00b0C<\/td>\n<\/tr>\n
Ambient operating
\nhumidity<\/strong><\/th>\n		10% to 95% (with no condensation or icing)<\/td>\n<\/tr>\n
Atmosphere<\/strong><\/th>\nMust be free from corrosive gases.<\/td>\n<\/tr>\n
Ambient storage
\ntemperature<\/strong><\/th>\n		-25 to 70\u00b0C (with no condensation or icing)<\/td>\n<\/tr>\n
Altitude<\/strong><\/th>\n2,000 m max.<\/td>\n<\/tr>\n
Pollution degree<\/strong><\/th>\n2 or less: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
Noise immunity<\/strong><\/th>\n2 kV on power supply line (Conforms to IEC61000-4-4.)<\/td>\n<\/tr>\n
Overvoltage category<\/strong><\/th>\nCategory II: Conforms to JIS B3502 and IEC 61131-2.<\/td>\n<\/tr>\n
EMC immunity level<\/strong><\/th>\nZone B<\/td>\n<\/tr>\n
Vibration resistance<\/strong><\/th>\nConforms to IEC 60068-2-6.
\n5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m\/s2<\/sup>,
\n100 min each in X, Y, and Z directions
\n(10 sweeps of 10 min each = 100 min total)<\/td>\n<\/tr>\n
Shock resistance<\/strong><\/th>\nConforms to IEC 60068-2-27. 147 m\/s2<\/sup>, 3 times each in X, Y, and Z directions<\/td>\n<\/tr>\n
Applicable standards *<\/strong><\/th>\ncULus: Listed (UL508), ANSI\/ISA 12.12.01, EU: EN 61131-2, C-Tick or RCM,
\nKC Registration, NK, LR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

* Ask your OMRON representative for the most recent applicable standards for each model.<\/p>\n<\/div>\n<\/div>\n

Function Specification<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n
Function<\/strong><\/th>\nDescription<\/strong><\/th>\n<\/tr>\n
Free-Run Refreshing<\/strong><\/th>\nWith this I\/O refreshing method, the refresh cycle of the NX bus and I\/O refresh cycles of
\nthe NX Units are asynchronous.<\/td>\n<\/tr>\n
CT Allocation<\/strong><\/th>\nThis function is used to assign each CT input to a corresponding control output.<\/td>\n<\/tr>\n
Reading CT Currents<\/strong><\/th>\nThis function reads CT inputs as heater currents or leakage currents.<\/td>\n<\/tr>\n
Heater Burnout Detection<\/strong><\/th>\nThis function detects heater burnouts. A heater burnout is detected if the control output is
\nON and the heater current is equal to or less than the heater burnout detection current.<\/td>\n<\/tr>\n
SSR Failure Detection<\/strong><\/th>\nThis function detects SSR failures. An SSR failure is detected if the control output is OFF
\nand the leakage current is equal to or greater than the detection current. An SSR failure
\nis a failure that is caused by an SSR short-circuit.<\/td>\n<\/tr>\n
Time-proportional Output<\/strong><\/th>\nThis function controls a control output by using the manipulated variable from the host
\ncontroller as a duty ratio. You can also specify the minimum pulse widths and execute
\nimmediate output commands.<\/td>\n<\/tr>\n
Load Rejection Output
\nSetting<\/strong><\/th>\n		This function performs a preset output operation when the Heater Burnout Detection Unit
\ncannot receive an output set value due to a communications error between the host and the
\nCommunications Coupler Unit or due to an error on the NX bus.<\/td>\n<\/tr>\n
Load Short-circuit
\nProtection<\/strong><\/th>\n		This function is used to protect the output circuits of the Heater Burnout Detection Unit
\nwhen an external device short-circuits. This function is supported only by the NX-HB3201.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Heater Burnout Detection Unit<\/h4>\n

Heater Burnout Detection Unit (NPN) NX-HB3101<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nHeater Burnout Detection Unit<\/td>\nModel<\/strong><\/th>\nNX-HB3101<\/td>\n<\/tr>\n
Number of
\npoints<\/strong><\/th>\n		4 CT inputs and 4 control outputs<\/td>\nExternal
\nconnection
\nterminals<\/strong><\/th>\n		Screwless Clamping Terminal Block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n		Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output indicators
\n\"3539_sp_3_1\"<\/td>\n<\/tr>\n
CT input
\nsection<\/strong><\/th>\n		CT current
\ninput range<\/strong><\/th>\n		0 to 0.125 A<\/td>\nControl
\noutput
\nsection<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		NPN<\/td>\n<\/tr>\n
Input
\nresistance<\/strong><\/th>\n		Approx. 2.7 \u03a9<\/td>\nControl period<\/strong><\/th>\n50 to 100,000 ms<\/td>\n<\/tr>\n
Connectable
\nCTs<\/strong><\/th>\n		E54-CT1 and
\nE54-CT3<\/td>\n		Manipulated
\nvariable<\/strong><\/th>\n		0% to 100%<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1 ms<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n12 to 24 V DC<\/td>\n<\/tr>\n
Maximum
\nheater
\ncurrent<\/strong><\/th>\n		50 A AC<\/td>\nOperating load
\nvoltage range<\/strong><\/th>\n		10.2 to 28.8 VDC<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1 A<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		0.1 A\/point, 0.4 A\/Unit<\/td>\n<\/tr>\n
Overall
\naccuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b15% (full scale)
\n\u00b11 digit<\/td>\n		Maximum inrush
\ncurrent<\/strong><\/th>\n		1.0 A\/point max., 10 ms<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b12% (full scale)
\n\u00b11 digit<\/td>\n		Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
Disconnection\/
\nshort-circuit
\ndetection<\/strong><\/th>\n		None<\/td>\n<\/tr>\n
Conversion
\ntime<\/strong><\/th>\n		10 ms<\/td>\nProtective
\nfunctions<\/strong><\/th>\n		None<\/td>\n<\/tr>\n
Dimensions
\n(mm)<\/strong><\/th>\n		12 \u00d7 100 \u00d7 71 mm (W\u00d7H\u00d7D)<\/td>\nIsolation
\nmethod<\/strong><\/th>\n		Between control outputs and Internal
\ncircuits: Photocoupler isolation
\nNo isolation between Internal circuits
\nand CT inputs<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated circuits (at 100 VDC)<\/td>\nDielectric
\nstrength<\/strong><\/th>\n		510 VAC between isolated circuits for
\n1 minute with a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power
\nsupply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent
\ncapacity of
\nI\/O power
\nsupply
\nterminals<\/strong><\/th>\n		IOV: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit
\npower
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.05 W max.
\n\u2022 Connected to a Communications Coupler Unit
\n0.75 W max.<\/td>\n		Current
\nconsumption
\nfrom I\/O
\npower
\nsupply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit
\nconfiguration<\/strong><\/th>\n		\"3539_sp_3_2\"<\/td>\n<\/tr>\n
Installation
\nmethod and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection
\ndiagram<\/strong><\/th>\n		\"3539_sp_3_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Heater Burnout Detection Unit (PNP) NX-HB3201<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Unit name<\/strong><\/th>\nHeater Burnout Detection Unit<\/td>\nModel<\/strong><\/th>\nNX-HB3201<\/td>\n<\/tr>\n
Number of
\npoints<\/strong><\/th>\n		4 CT inputs and 4 control outputs<\/td>\nExternal
\nconnection
\nterminals<\/strong><\/th>\n		Screwless Clamping Terminal Block
\n(16 terminals)<\/td>\n<\/tr>\n
I\/O
\nrefreshing
\nmethod<\/strong><\/th>\n		Free-Run refreshing<\/td>\n<\/tr>\n
Indicators<\/strong><\/th>\nTS indicator and output indicators
\n\"3539_sp_4_1\"<\/td>\n<\/tr>\n
CT input
\nsection<\/strong><\/th>\n		CT current input
\nrange<\/strong><\/th>\n		0 to 0.125 A<\/td>\nControl
\noutput
\nsection<\/strong><\/th>\n		Internal I\/O
\ncommon<\/strong><\/th>\n		PNP<\/td>\n<\/tr>\n
Input resistance<\/strong><\/th>\nApprox. 2.7 \u03a9<\/td>\nControl period<\/strong><\/th>\n50 to 100,000 ms<\/td>\n<\/tr>\n
Connectable CTs<\/strong><\/th>\nE54-CT1 and
\nE54-CT3<\/td>\n		Manipulated
\nvariable<\/strong><\/th>\n		0% to 100%<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n1 ms<\/td>\n<\/tr>\n
Rated voltage<\/strong><\/th>\n24 VDC<\/td>\n<\/tr>\n
Maximum heater
\ncurrent<\/strong><\/th>\n		50 A AC<\/td>\nOperating load
\nvoltage range<\/strong><\/th>\n		15 to 28.8 VDC<\/td>\n<\/tr>\n
Resolution<\/strong><\/th>\n0.1 A<\/td>\nMaximum load
\ncurrent<\/strong><\/th>\n		0.1 A\/point, 0.4 A\/Unit<\/td>\n<\/tr>\n
Overall accuracy
\n(25\u00b0C)<\/strong><\/th>\n		\u00b15% (full scale)
\n\u00b11 digit<\/td>\n		Maximum inrush
\ncurrent<\/strong><\/th>\n		1.0 A\/point max., 10 ms<\/td>\n<\/tr>\n
Leakage current<\/strong><\/th>\n0.1 mA max.<\/td>\n<\/tr>\n
Influence of
\ntemperature
\n(0 to 55\u00b0C)<\/strong><\/th>\n		\u00b12% (full scale)
\n\u00b11 digit<\/td>\n		Residual voltage<\/strong><\/th>\n1.5 V max.<\/td>\n<\/tr>\n
Disconnection\/
\nshort-circuit
\ndetection<\/strong><\/th>\n		None<\/td>\n<\/tr>\n
Conversion time<\/strong><\/th>\n10 ms<\/td>\nProtective
\nfunctions<\/strong><\/th>\n		Provided.<\/td>\n<\/tr>\n
Dimensions
\n(mm)<\/strong><\/th>\n		12 \u00d7 100 \u00d7 71 mm (W\u00d7H\u00d7D)<\/td>\nIsolation
\nmethod<\/strong><\/th>\n		Between control outputs and Internal
\ncircuits: Photocoupler isolation
\nNo isolation between Internal circuits
\nand CT inputs<\/td>\n<\/tr>\n
Insulation
\nresistance<\/strong><\/th>\n		20 M\u03a9 min. between isolated
\ncircuits (at 100 VDC)<\/td>\n		Dielectric
\nstrength<\/strong><\/th>\n		510 VAC between isolated circuits for
\n1 minute with a leakage current of
\n5 mA max.<\/td>\n<\/tr>\n
I\/O power
\nsupply
\nmethod<\/strong><\/th>\n		Supplied from the NX bus.<\/td>\nCurrent
\ncapacity of
\nI\/O power
\nsupply
\nterminals<\/strong><\/th>\n		IOV: 0.1 A max. per terminal<\/td>\n<\/tr>\n
NX Unit
\npower
\nconsumption<\/strong><\/th>\n		\u2022 Connected to a CPU Unit
\n1.05 W max.
\n\u2022 Connected to a Communications Coupler Unit
\n0.75 W max.<\/td>\n		Current
\nconsumption
\nfrom I\/O
\npower
\nsupply<\/strong><\/th>\n		20 mA max.<\/td>\n<\/tr>\n
Weight<\/strong><\/th>\n70 g max.<\/td>\n<\/tr>\n
Circuit
\nconfiguration<\/strong><\/th>\n		\"3539_sp_4_2\"<\/td>\n<\/tr>\n
Installation
\nmethod and
\nrestrictions<\/strong><\/th>\n		Installation orientation:
\n\u2022 Connected to a CPU Unit: Possible in upright installation.
\n\u2022 Connected to a Communications Coupler Unit: Possible in 6 orientations.
\nRestrictions: No restrictions<\/td>\n<\/tr>\n
Terminal
\nconnection
\ndiagram<\/strong><\/th>\n		\"3539_sp_4_3\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n

Version Information<\/h4>\n

Connected to a CPU Unit<\/h4>\n
\n
\n

Refer to the user’s manual for details on the CPU Units for the CPU Unit to which NX Units can be connected.<\/p>\n<\/div>\n<\/div>\n

Heater Burnout Detection Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCPU Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-HB3101<\/td>\nVer.1.0<\/td>\nVer.1.13<\/td>\nVer.1.17<\/td>\n<\/tr>\n
NX-HB3201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user’s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

Connected to an EtherCAT Coupler Unit<\/h4>\n

Heater Burnout Detection Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nEtherCAT
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-HB3101<\/td>\nVer.1.0<\/td>\nVer.1.0<\/td>\nVer.1.05<\/td>\nVer.1.16<\/td>\n<\/tr>\n
NX-HB3201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.<\/p>\n<\/div>\n<\/div>\n

Connected to an EtherNet\/IP Coupler Unit<\/h4>\n

Heater Burnout Detection Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit
\nversion<\/strong><\/th>\n		Application with an
\nNJ\/NX\/NY-series Controller *1<\/strong><\/th>\n		Application with a
\nCS\/CJ\/CP-series PLC *2<\/strong><\/th>\n<\/tr>\n
EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		CPU Unit or
\nIndustrial PC<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		EtherNet\/IP
\nCoupler Unit<\/strong><\/th>\n		Sysmac
\nStudio<\/strong><\/th>\n		NX-IO
\nConfigurator *3<\/strong><\/th>\n<\/tr>\n
NX-HB3101<\/td>\nVer.1.0<\/td>\nVer.1.2<\/td>\nVer.1.14<\/td>\nVer.1.19<\/td>\nVer.1.0<\/td>\nVer.1.16<\/td>\nVer.1.00<\/td>\n<\/tr>\n
NX-HB3201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.
\n*1. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of EtherNet\/IP Units corresponding to EtherNet\/IP Coupler Units.
\n*2. Refer to the user’s manual of the EtherNet\/IP Coupler Unit for the unit versions of CPU Units and EtherNet\/IP Units corresponding to EtherNet\/IP Coupler Units.
\n*3. For connection to an EtherNet\/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the peripheral USB port on the EtherNet\/IP Coupler Unit. You cannot connect by any other path. If you need to connect by another path, use an EtherNet\/IP Coupler Unit with unit version 1.2 or later.<\/p>\n<\/div>\n<\/div>\n

Connected to an Communication Control Unit<\/h4>\n

Heater Burnout Detection Units<\/h4>\n
\n
\n
\n\n\n\n\n\n\n
NX Unit<\/strong><\/th>\nCorresponding unit versions\/versions<\/strong><\/th>\n<\/tr>\n
Model<\/strong><\/th>\nUnit version<\/strong><\/th>\nCommunication Control Unit<\/strong><\/th>\nSysmac Studio<\/strong><\/th>\n<\/tr>\n
NX-HB3101<\/td>\nVer.1.0<\/td>\n—<\/td>\n—<\/td>\n<\/tr>\n
NX-HB3201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

Note: 1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified version, support is provided by the oldest available version after the specified version. Refer to the user\u2019s manuals for the specific Units for the relation between models and versions.
\nNote: 2. You cannot connect the relevant NX Unit to the Communication Control Unit if \u201c—\u201d is shown in the corresponding unit versions\/versions column.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n

\n
\n

(Unit: mm)<\/p>\n<\/div>\n<\/div>\n

Screwless Clamping Terminal Block Type<\/h4>\n
\n
\n

12 mm Width<\/strong><\/p>\n<\/div>\n

\"NX-HB<\/div>\n<\/div>\n
\n
\n

* The dimension is 1.35 mm for Units with lot numbers through December 2014.<\/p>\n<\/div>\n<\/div>\n

 <\/p>\n\n\n\n\n\n\n
\n
Catalog Name<\/div>\n<\/th>\n
\n
Catalog Number
\n[size]<\/div>\n<\/th>\n
\n
Last Update<\/div>\n<\/th>\n<\/tr>\n<\/thead>\n
\"\"\u00a0NX-TS\/HB Data Sheet<\/a><\/td>\n–
\n[5191KB]<\/span><\/td>\n		Aug 01, 2018<\/td>\n<\/tr>\n
\"\"\u00a0NX-series I\/O System Catalog<\/a><\/td>\nR183-E1-09
\n[6683KB]<\/span><\/td>\n		Nov 01, 2018<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

Temperature control with heater burnout detection in conjunction with a temperature input unit and PID instructions<\/h2>\n","protected":false},"featured_media":1344,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[98,63,72],"product_tag":[],"_links":{"self":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product\/1385"}],"collection":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/comments?post=1385"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media\/1344"}],"wp:attachment":[{"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/media?parent=1385"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=1385"},{"taxonomy":"product_tag","embeddable":true,"href":"http:\/\/store.al-tet.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=1385"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}